Integrator digs deep inside Matrox Imaging Library MIL to inspect turbine blades in aircraft engines
This content was submitted directly to this Web site by the supplier.
White Paper |
February 18, 2010
Integrator digs deep inside Matrox Imaging Library MIL to inspect turbine blades in aircraft engines
Aircraft engine manufacturers fully understand that even small surface defects can reduce performance, increase maintenance costs, and reduce the useful life of an aircraft engine. They need to inspect turbine blades very carefully to maintain the efficiency and reliability that the air transport industry requires.
One particular North American manufacturer inspected its blades by hand and human eye. The highly trained inspectors measured hundreds of features and checked for surface defects at depths in the order of thousandths of an inch. Manual inspection was not only costly in terms of time and labor, but subjective as well. Results were variable and even differed between inspectors. Finally, because manual inspection was so time consuming, there was no systematic inspection of every blade; only a sampling of blades were inspected. Clearly, the manufacturer required an approach that would allow systematic inspections of the blades, save time, and yield consistent and repeatable results.
This content is sponsored by the supplier. Your contact information may be shared with this sponsor, as detailed in our Privacy Policy. Your contact information will not shared with a sponsor whose content you have not reviewed.Newsletters
Click on any newsletter to view a sample.
What's New
This sponsored content was submitted directly to this web site by the supplier, and was not handled by the AW editorial staff. Automation World may share your contact information with our sponsors, as detailed in our Privacy Policy. Automation World will not share your information with a sponsor whose content you have not reviewed.
