- Tactical Briefs
- Collaborative Manufacturing
- Control Panel Optimization
- Embedded systems & Trends
- Embedded Vision in Manufacturing
- Energy Efficiency
- Ethernet I/O Networking
- Factory Floor Network Deployment
- Factory Floor Network Reliability
- Fieldbus I/O
- Hands-on Guide to OEE
- HMI, From the Web to the Cloud
- Industrial PCs and the IoT
- Internet of Things
- Machine Safety
- Machine Safety Standards & Strategies
- Make a lasting connection
- Mechatronics @ Work: Insight & Technology Solutions
- Opening Up Your Gateway to Asia
- Real-time Operational Intelligence (RtOI)
- Robotics in U.S. Manufacturing
- Robots & Machines in Motion
- The Future of Industrial PCs
- The power of PackML
| August 15, 2013
Motion: How to Decide When to Distribute Control
Although automation vendors tend to urge users to consider decentralizing drives and distributing as much intelligence as possible throughout their machinery, most readily admit that it’s not for every application. The centralized approach is still valid for many applications.
The natural question to ask is, how does one go about making a decision? Here is some advice from Tom Jensen, technology evangelist at Lenze Americas Corp.
• Start with a white sheet of paper. “Don’t copy and paste code and concepts for new mechatronic machines,” advises Jensen. “Copying old concepts locks you into old hardware concepts.”
• Think functionality. Ask, what does the machine need to do? In general, complex motion tends to benefit the most from centralized control. “If the machine can be simplified, gains might be realized with remote motor-mounted frequency drives,” notes Jensen.
• Consider the machine’s footprint. Small machines with short cable runs normally have a cabinet.
• Count the motors. “A low motor count works against decentralized drives,” says Jensen. “Generally, decentralized motion control is great for a single axis, but syncing multiple axes requires programming and wiring between controllers that can be done easily in a centralized controller.”
An example of an application that can benefit from distributed drives is the machinery used in warehouses and distribution centers. These facilities can have more than 12,000 motors and drives actuating various palletizing and wrapping machines, conveyors, automated storage-and-retrieval units, and robots.
“A traditional motor would have a cabinet-mounted motor control device, such as soft start, breaker or drive,” says Jensen. “Such solutions would prove to be more costly and hard to maintain because of the motor structure.”
For this reason, he and his colleagues work with manufacturers of warehouse equipment to reduce the size of motor-control centers by installing motor-mounted induction drives. Driving many motors with one three-phase power supply can greatly reducing the branch protection needed to support a line, according to Jensen. Distributing drives and daisy chaining motors also can reduce the need for cabinet and cable by as much as 80 percent, he says.
>> Read Automation World's complete coverage, "Decentralized Motion, Driven by Intelligence"
E-Book Special Report
IT Delivers on Automation’s Promise
Sign up to receive timely updates from the editors at Automation World and download this FREE Special Report on the transformative power of data in manufacturing. By integrating information and automation technologies, manufacturers are finally achieving major gains in productivity from their automated systems.