Pick Your Processor

Aug. 5, 2014
Embedded options in industrial computing have taken a major step forward by adopting a common consumer computing tactic.

A few years back, when I first started covering embedded control technologies on a regular basis, more than a few people questioned my decision to focus so much attention on that topic. Their argument was that manufacturing end users did not care what processor was in their PLC, PAC or industrial PC; they only cared that the computer could handle the task it would be assigned.

What kept me writing on the topic was the clear trend I saw developing in chip design, with more and more chips being produced specifically to tackle industrial applications. At the same time, I saw an increasing number of industrial applications using multicore processors.

I have to admit, I had never been convinced that the processing options available for industrial computers would reach the level of that offered in the consumer realm … until now.

Advantech Industrial Automation Group has recently upgraded its multifunctional PPC-6120 so that users can now install the processor of their choice. According to Advantech, users can select any fourth generation processor—from basic Celeron processors all the way up to Intel i7 processors to meet their current application and future-proofing requirements.

The PPC-6120 is no crossover computing technology. It is clearly an industrial PC. It is a 12.1-in. five-wire resistive touch screen panel PC that connects to devices through an integrated isolated RS-422/485 port. Extra displays using the VGA and display port can be used to extend the viewing area if needed. The PPC-6120 has an IP65 front bezel, four RS-232 and four USB 3.0 ports, dual Gigabit ports, and a PCIex4 or PCI card can be added.

Time will tell if this consumer PC approach of choosing your own processor takes off in the industrial world, but I suspect with the number of industry specific processors being introduced by the likes of Texas Instruments, Altera and Intel, that it will be surprising if industry end users do not adopt this approach.

Read more Automation World coverage of industrial embedded trends:

Sponsored Recommendations

1 Pole B-Trip DLS8 Series: Manual Motor Controller

Tailored to meet various requirements, this series offers B Trip Characteristics for two distinct rated current ranges - 1A to 10A and 13A to 60A. This ensures reliable and customized...

Versatile 2-Pole Solution for Precise Automation

Altech Corp proudly presents the 2 Pole B-Trip DLS8 Series - UL508 Manual Motor Controller, a robust and reliable solution for precise motor control in your automation and control...

Advanced 4 Pole B-Trip Manual Motor Controller by Altech Corp

Discover superior motor control with the DLS8 Series - UL508 Manual Motor Controller, now available in a 4 Pole B-Trip configuration. As your trusted source for automation and...

Reliable and Efficient 1 Pole B-Trip Supplementary Protector by Altech Corp

Introducing the cutting-edge DLS7 Series - UL1077 Supplementary Protector with B Trip Characteristics, engineered for precise protection in diverse industrial applications. Altech...