I/O Modules Support EtherNet/IP

May 8th, 2008

The BradControl family of I/O modules adds EtherNet/IP to its list of supported protocols.

The modules are designed to provide a reliable solution for connecting industrial controllers communicating on industrial networks to I/O modules. Already supporting Modbus TCP (UDP), the 60mm wide family of I/O modules operates as a slave device in the Ethernet control system, gathering signals and data from local field devices. The I/O module comes in an 8-port, 16 channel format with the availability of multiple I/O configurations supporting PNP and NPN input devices. Features include diagnostic LEDs, a built-in 2-port switch for network connections and a 4-digit display for addressing and status information. The I/O modules support connections using standard threaded M12 connectors or the push-to-lock Ultra-Locksystem for quick and simple connections to the I/O module and devices.

Molex Inc.
www.woodhead.com
847.353.2646.

CLICK TO ENLARGE

indicates a sponsored article that was submitted directly to this Web site by the supplier, and was not handled by the AW editorial staff.
Automation World may share your contact information with our sponsors, as detailed in our Privacy Policy.
Automation World will not share your information with a sponsor whose content you have not reviewed.