Weighing only 200 g (7 oz.), and fully compliant with the ISO 9409-1 flange standard for collaborative applications, the unit lets any operator change the end-of-arm tooling on cobots in a manner of seconds and without any sharp edges like most tool chargers, making it safer for humans and robots to work side by side. Its light weight means it has a low impact on robot payload, while its compact size adds minimal distance from the tool center point (TCP) to the robot, which minimizes stress on robot joints. The Quick Changer releases end-of-arm tools with just a click and inserted tools are automatically positioned correctly with a repeatability of ±0.02 mm. The device can be used on any robot arm, drone, or other equipment with an ISO-9409-1 flange.
>>For more information on this product, click here
OnRobot
http://onrobot.com/
