Wittenstein: Mounting kit for rack pinning

Wittenstein’s two-piece mounting kit is comprised of a special pin and sleeve, which are fitted together using an Allen key and hammer, enabling racks to be fixed to the machine bed with a positive connection.

This content was submitted directly to this website by the supplier.

Mounting kit for rack pinning
Mounting kit for rack pinning

The time required to securely pin a rack with two pin holes, for example, is reduced from 1/2 or 3/4 of an hour to not much more than a minute as a result. The rack can also be replaced quickly and easily for servicing.

This innovative pinning method highlights very clearly how Wittenstein alpha thinks outside the box – in terms of systems rather than isolated drive solutions. The ergonomic and efficient alternative to screw clamps for rack installation benefits users with a time saving of up to fifty percent. Thanks to Wittenstein alpha’s new INIRA pinning concept, the time required to install a rack is now significantly shorter.

Chips and swarf are always undesirable during assembly work: they are difficult to control and have a destructive effect. Wittenstein alpha’s new chipless pinning principle successfully amends a proven method that was first established in the market several decades ago; it was developed in response to customer demands for quick and easy assembly.

Chipless pinning offers numerous advantages for machine builders: instead of drilling and reaming the rack and the machine bed together in a time consuming process and then driving in the pin, this innovative, two-piece assembly solution from Wittenstein alpha facilitates a secure and completely chipless connection! The holes which are required in the bed can be machined to fit exactly when the components are manufactured – in a single setting with the fixing holes. The two-piece mounting kit is comprised of a special pin and sleeve, which are fitted together using just a hammer and an Allen key. The time saving as a result of this chipless assembly process is quite substantial: each rack can be securely fixed with a positive connection in less than 60 seconds – compared to 35 or 40 minutes with conventional pinning. Easy dismantling and reusability mean the rack can be exchanged rapidly in case of repairs or retrofits.

Companies in this article
More in Home