SIL 3 Process Safety Relay

Dec. 1, 2010
Specifically designed to operate with fail-safe controls in process applications, the PSR-FSP process safety relay can be used in applications up to a Safety Integrity Level (SIL) 3 requirement, according to IEC 61508. 
The PSR-FSP is compatible with “test pulses” that occur on safe PLC/DCS outputs. Inrush requirement is limited for safe PLC/DCS output compatibility, and it has a built-in fuse for the safe output contact. Just 17.5mm wide, the relay features a normally open (NO) redundant safety output and a normally closed status contact that can be externally connected. The maximum switched current of the NO contact is 5A. The device also has an externally accessible 5x20mm standard fuse to protect the load contact.Phoenix Contact Inc.www.phoenixcontact.com800.322.3225

Subscribe to Automation World's RSS Feeds for Products

Sponsored Recommendations

Measurement instrumentation for improving hydrogen storage and transport

Hydrogen provides a decarbonization opportunity. Learn more about maximizing the potential of hydrogen.

Learn About: Micro Motion™ 4700 Config I/O Coriolis Transmitter

An Advanced Transmitter that Expands Connectivity

Learn about: Micro Motion G-Series Coriolis Flow and Density Meters

The Micro Motion G-Series is designed to help you access the benefits of Coriolis technology even when available space is limited.

Micro Motion 4700 Coriolis Configurable Inputs and Outputs Transmitter

The Micro Motion 4700 Coriolis Transmitter offers a compact C1D1 (Zone 1) housing. Bluetooth and Smart Meter Verification are available.