Modbus TCP/IP Simulation Driver

Sept. 9, 2007
A MiMiC Simulation Driver allows I/O and process simulation for devices that support the Modbus TCP/IP protocol. 
The driver provides high-speed simulation for Modbus controllers; quick and easy set up using commercial Ethernet networks; and world-class simulation for devices supporting industrial Ethernet, says the vendor. This simulation driver allows non-intrusive simulation for controllers that support Modbus TCP/IP protocols such as Schneider Quantum PLCs and HIMA SIS PLCs. It takes about 15 minutes to configure and simulate Modbus registers. The Open Modbus TCP/IP driver is included in the Modbus Modicon Driver pack, MIM-2102, which is supported in MiMiC v2.8.45 or higher.

Mynah Technologies