Distributed Intelligence - the New Approach

Oct. 1, 2008
At the input/output level, most of today’s systems are similar—clumps of I/O connected via a device network to a deterministic, hierarchical system.
A multi-faceted revolution must inevitably occur as the numbers of inputs and outputs increase. Smart, wireless sensor networks will soon be everywhere, collecting and transmitting vast amounts of previously unmeasured data. To accommodate higher I/O point count, significant new advantages and benefits will emerge through architectures not previously considered practical.Conventional control systems are designed to be deterministic because non-determinism is considered unacceptable. Increasing I/O point density will confirm the limits of standard control architectures, and signal the demise of deterministic control. A hierarchical control system is subject to complex software constraints, communication conflicts and network-speed limitations. The upper limits appear to be constrained only by data rates. The system solution of increasing bandwidth does not work. Removing the need for data rate does.Few contemporary control systems have achieved practical I/O point counts of more than a few hundred thousand. By contrast, programmable, intelligent, autonomous I/O systems with algorithmic (rule-based) response mechanisms have no theoretical complexity limit. Vastly improved performance will be achieved at a fraction of the cost of deterministic hierarchical systems.Over the past several years, Complexity (Chaos) Theory analysis is demonstrating that so-called deterministic systems are, in reality, non-deterministic (brittle or prone to failure) when complexity increases. Conversely, it is being demonstrated that interacting autonomous agent systems on “the edge of chaos” provide predictable performance—locally non-deterministic, but globally stable and predictable.Secret agent
By “autonomous,” I mean an intelligent, rule-based I/O cluster, with minimal instructions in each node, managed remotely by the network. Autonomous Agent architecture—intelligent, networked, processing—is where the next major software advances will occur. This will bring significant price/performance improvements by putting the processing right at the front-end—at the sensors and actuators. When individual devices become programmable and re-programmable over the network, the ability to self-organize becomes inherent. The “agents” are not programmed—the “behavior” is modified. The software architectures required to achieve “self-organizing systems” are still somewhat new, but practical applications are emerging. Change in the relative relationships among cost/size/complexity heralds the next revolution in control. The transition will occur away from traditional hierarchical and procedural controls to rule-based behavior. When each I/O clump becomes intelligent, control will be handled locally through intelligent peer-to-peer communications between the sensors and actuators.Beyond just robustness of the system and improved overall performance, the increasing connectedness of peer-to-peer control systems brings Metcalfe’s Law (exponentially increasing effectiveness) and the new science of Complexity into play. The result is an intrinsically different kind of operation—complex adaptive systems (CAS). These systems yield significant advances through reduced software complexity, faster and easier installation, robust performance and vastly improved flexibility, with the capability to handle much larger numbers of real-time sensing and control connections.Within the next decade, today’s concept of software will disappear—it will become part of the product, just as today’s firmware is not external and separate. The only external software needed will be in the browser—everything else will be “applets” and similar “client-side” operations, triggered by “objects” and “agents” that reside somewhere within the system.These types of systems have roots in the work that is being done on artificial life and genetic algorithms at places like the Santa Fe Institute. During the next decade, the results will become evident in factory automation and process controls. If you wait, you’ll be too late.Jim Pinto is an industry analyst and commentator, writer, technology futurist and angel investor. You can e-mail him at: [email protected]. Or review his prognostications and predictions on his Web site: www.jimpinto.com

Sponsored Recommendations

Strategizing for sustainable success in material handling and packaging

Download our visual factory brochure to explore how, together, we can fully optimize your industrial operations for ongoing success in material handling and packaging. As your...

A closer look at modern design considerations for food and beverage

With new and changing safety and hygiene regulations at top of mind, its easy to understand how other crucial aspects of machine design can get pushed aside. Our whitepaper explores...

Fueling the Future of Commercial EV Charging Infrastructure

Miguel Gudino, an Associate Application Engineer at RS, addresses various EV charging challenges and opportunities, ranging from charging station design strategies to the advanced...

Condition Monitoring for Energy and Utilities Assets

Condition monitoring is an essential element of asset management in the energy and utilities industry. The American oil and gas, water and wastewater, and electrical grid sectors...