Simplify Chlorine Dioxide Measurement

The CDA-22 Chlorine Dioxide Analyzer is designed to measure Chlorine Dioxide in concentrations ranging from 0.05-20ppm CIO2.

May 3rd, 2010

Aw 1814 1005 Ecdi

Featuring a panel-mounted plumb-and-play design and automatic flow control in a low-maintenance complete measurement system, the CDA-22 is well-suited for application in municipal water systems, industrial cooling and rinse water, wastewater or other fresh water samples. Easy to install and maintain, the CDA-22 incorporates a CIO2 sensor, automated flow control device and analyzer/controller mounted on a PVC panel. Installation is complete after connecting the sample and drain lines, power and outputs. The low-maintenance CDA-22 can run for up to one year between electrolyte/membrane changes. Calibration of the CDA-22 is accomplished with DPD comparison.

Electro-Chemical Devices Inc.
www.ecdi.com
800.729.1333

Subscribe to Automation World's RSS Feeds for Products

Denison Technologies Integrates HMS Networks’ Edge Gateways Into Their Power Quality Monitoring System

Denison Technologies and HMS Networks partner to bring a product that delivers industrial reliability and reduced unplanned downtime through continuous power monitoring.

Ec Js 20200706 04 Group Image Serial Gateways Device Master

Pepperl+Fuchs Reveals Newly Integrated DeviceMaster Products

DeviceMaster gateways link the world of serial communication to Internet of Things.

Overview Io Link

Starter Kits Provide Inexpensive Entry into Balluff IO-Link

Measurement, sensing, and traceability versions available at promotional pricing.

PI North America Announces Website Expansion to the Spanish Language

PI North America, the non-profit member-supported organization for PROFIBUS and PROFINET technologies in North America, announces an expansion of its website to the Spanish language.

Mac Sec Swiches

Wago’s New Managed Switches Provide Leading-Edge Network Security

Managed switches from Wago provide point-to-point network security that protects against numerous threats.

Sp Et111 1600x800 0

T1 Industrial Connector for Industrial Single Pair Ethernet

Harting's T1 industrial connector mating face is standardized according to IEC 63171-6 (formerly IEC 61076-3-125) and meets IEEE 802.3 requirements for Single Pair Ethernet, and also works across common industrial protocols.

Thomas Rettig states “As the inventor of EtherCAT, Beckhoff is pleased with the overwhelming response despite the fact that the openness of EtherCAT generates more competition. On the other hand, Beckhoff customers benefit from the greatest diversity of devices on the market.”

Beckhoff Technology Sets Vendor ID Record

The EtherCAT Technology Group issued its 3,000th EtherCAT vendor ID in July 2020. Beckhoff introduced the EtherCAT real-time Ethernet system to the market in 2003 and disclosed its details within the ETG the same year.

Eigr C3 White Label 5 19

EIGR-C3 Gigabit Cellular Router Now Available

The EIGR-C3 Gigabit Cellular Router from Contemporary Controls is a high-speed router that links cellular to 10/100/1000 Mbps Internet Protocol (IPv4) networks.

Pr Io Link Masters No Bkgd

IIoT-Enabled Network Blocks for Digital Industrial Transformation

Carlo Gavazzi's Y Series feature an embedded web interface and OPC UA for full remote access and control of the IO-Link master and connected devices.

Wago’s New I/O System Field Provides Dependable, Cabinet-Free Automation

Wago's I/O System Field is equipped with innovative load management. Current and voltage levels can be recorded and evaluated, and overload limits and alarms can be set for each channel providing system reliability.

Lnp 1204g 10g Sfp (v2) 1

Antaira’s 12-Port 10G Unmanaged Industrial Ethernet Switches

Antaira Technologies's 10-Gb unmanaged Ethernet switches are industrial-grade and are designed for various markets’ edge-level networking applications in manufacturing automation, power/utility, water wastewater, and oil/gas/mining.

Inbacprt1 K20000 Side L Btl

New Intesis Gateway Makes Communication Between Profinet and BACnet Easy

A new IntesisTM protocol translator for communication between PROFINET PLCs on factory floors and Building Management Systems with BACnet IP/MSTP.

Computer for Machine Vision Applications

The Matrox Supersight Uno offers maximal I/O capabilities plus direct interfacing with GigE Vision and USB3 Vision cameras.

Uno 220 Front Right 3m

Advantech Launches UNO-220 Raspberry Pi-Ready Industrial Gateway Kit for IoT Application Development

Advantech, a leading provider of embedded platform system, is pleased to announce its new UNO-220 Raspberry Pi-ready industrial-grade gateway kit.

Pr Icotek Kel Dp

New Cable Entry Plates from Icotek

Icotek is expanding its range of cable entry plates with the articles KEL-DP 25 version A and KEL-DP 32 version A and B.

Inbacprt1 K20000 Side L Btl

New Intesis Gateway Makes Communication Between Profinet and BACnet Easy

HMS Networks announces a new Intesis protocol translator for communication between Profinet PLCs on factory floors and Building Management Systems with BACnet IP/MSTP.

Building Automation Systems (BAS) connections with Modbus RTU

The Modbus Gateway MR-GW from Metz Connect is a cost-effective communication option of Modbus TCP clients with one or more Modbus RTU slaves, and features intuitive and software-independent TCP configuration via web interface.

Can Ib640 Pcie Montage 2

CAN-FD Multi-channel Ixxat PC-interface for Automotive Test Systems and Industrial Applications

HMS Networks now extends its Ixxat PC-interface portfolio with the multi-channel interface CAN-IB 640/PCIe that offers four channels each for CAN-FD/CAN and LIN connectivity.

Anybus Wireless Bolt Press Photo

Cellular Internet Connectivity for Remote Assets With the Robust Anybus Wireless Bolt IoT

HMS Networks announces the release of Anybus Wireless Bolt Internet of Things which enables reliable cellular-based internet connectivity for assets in the field, using the new LTE-based networks NB-IoT and CAT-M1.

Southwire Vntc Cable 5x7

AutomationDirect Adds VNTC Tray Cable

VNTC Tray Cable from AutomationDirect is rated for use in Class I, II, and III, Division 2 hazardous location, allowing it for use in temperatures up to 75°C in wet locations and 90°C in dry locations.

More in Networks

Industrial Ethernet Cable 5x7

Cat5e Industrial Ethernet Cable from AutomationDirect

Quabbin DataMax Extreme Industrial Ethernet cable jackets were developed to survive the many industrial hazards that commercial jackets will not.

KEB’s EtherNet/IP™ S6/F6 products are ODVA certified.

KEB America Introduces EtherNet/IP for S6 and F6 Drives

EtherNetIP is now available for the S6 and F6 variable-frequency drives from KEB America.

Anybus Compact Com I Io T

Anybus CompactCom Enables Secure Industrial Internet of Things Communication for Devices

HMS Networks is announcing the availability of Anybus Com-pactCom IIoT Secure products for both EtherNet/IP and Profinet, including a new complete security platform for IIoT communication over OPC UA and MQTT.

Artila Reveals New Wide Temperature Wireless Gateway Matrix-702

Artila releases the the Matrix-702, a wireless Internet of Things gateway for wired or wireless data transmission.

Image Mepax Harpoon Pins

Press-Fit Contacts For Elbow and Straight PCB Sockets

Lemo’s new harpoon earthing pins enable pre- installing easily various receptacles/socket.

Stridelinx Extension 5x7

AutomationDirect Announces More StrideLinx Secure Remote Access VPN Router Options

AutomationDirect's StrideLinx virtual-private network routers has expanded to provide more connection options wired (gigabit), WiFi, and 4G cellular.

Ethernet/IP Enhanced To Further Address Industry 4.0 And IIoT

ODVA has enhanced EtherNet/IP with improved network diagnostics, new methods to optimize bandwidth, and resource requirements for devices, and the addition of IIoT building block infrastructure.

Wall-Mount Enclosures for Industry 4.0

The AX and KX enclosures from Rittal feature a simpler and faster assembly and component installation, greater flexibility and enhanced safety.

I/O for the IIoT

groov RIO from Opto 22 is an intelligent, Ethernet-based input/output unit that combines multi-signal, multifunction sensing with PoE-powered edge data processing for instant IIoT connection to real-world signals.

2004np Swiftsensors

Water-Resistant PoE Bridge

The Swift Sensors PoE Standard Bridge 1011 is built to withstand washdown procedures and exposure to chemicals.

1.5/3 GHz RF Signal Generators

The Aim-TTi TGR2051/2053 RF signal sources from Saelig provide high performance with touch-screen operation for improved functionality to support research and development, test, and service applications.

Mission Computing Systems for Rugged, Space-constrained Applications

Based on modular building blocks, Elma’s ComSys-536x family of Cisco-based mission computing systems offer performance and expansion configurations that meet specific computing-at-the-edge requirements.