Dual-color LED Cuts Costs

Aug. 26, 2008
The PL22STC Series dual-color LED pilot light allows on or off load monitoring with a single light, as the LED will be illuminated in either green or red.

This dual-color system saves inventory, because only one pilot device is required, and electrical panels require only one panel cut-out versus two. The pilot light is designed for 22mm (0.87-in.) through holes, and when powered on two of three terminals (2 and 0), the green LED illuminates. When powered on two other terminals (1 and 0), the red LED illuminates. The LEDs are rated to last at least 100,000 hours with brightness rated at ≥100cd/m2 (≥9.29ftc). The dual-color pilot lights are powered by any of five AC/DC voltage levels. Equipped with an IP65 housing, with operating temperatures of -25 to 70°C (-13 to 158°F), PL22STC pilot lights are cULus listed, and carry the CE and RoHS marks.

Carlo Gavazzi Automation Components
www.GavazziOnline.com
847.465.6100

Sponsored Recommendations

Shorten project timelines with these hidden-gem Ignition efficiency tips for designing HMIs, provided by Inductive Automation Sales Engineer Reese Tyson.
Get ready for that “where has this been all my life?” moment—over 25 hidden Ignition features await in our webinar. Our experts show how to boost your productivity and streamline...
Advanced software solutions, like those built in the Ignition platform from Inductive Automation, can provide a crucial means to navigating electrical grid challenges.
Unlock seamless data flow across your manufacturing sites with MQTT and Ignition—turn siloed operations into a connected, data-driven enterprise. Discover how standardization,...