Full-featured Ethernet Controller Chip

The W5300 is a full-featured 10/100 Ethernet controller IC with built-in MAC and PHY.

Aug 3rd, 2008

Aw 3644 0808 E Salg

It offers stable speeds up to 50 Mbps. The controller supports eight independent, simultaneous sockets, with a 16- or 8-bit data bus. It is capable of supporting simultaneous broadband access, VoIP, and digital broadcasting. Supporting most Ethernet Protocols (TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE) with internal hardware, the controller also supports hybrid (software and hardware) TCP/IP stacks. Using an internal 150MHz core, it allocates its internal 128Kbyte Tx/Rx memory according to socket throughput. The controller includes a fully hardwired TCP/IP core as well as a PHY interface layer and is designed for embedded applications where ease of integration, stability, high performance, size, and low system cost are considerations. Pricing is $5.99 each in 1,000-unit quantities.

Saelig Co. Inc.
www.saelig.com
888.772.3544

The Road to 5G Starts Now

Proponents make the case for 4.9G wireless technology as a stepping stone to 5G to empower new Industry 4.0 applications, from cobots to augmented reality-enabled predictive maintenance.

Technology Matters: Automated Quality, Valves, Software as a Service

In this episode we look at how quality inspections are evolving in light of new automation technologies, how CIP valves helped reduce downtime and waste for Noosa Yoghurt, and how the rise of software as a service is changing industrial software.

Delivering IIoT Data Across the Enterprise

How the Sparkplug Working Group is defining data transmitted using MQTT for use by any system, anywhere.

Industrial Ethernet cable from Molex.

Molex Joins Single Pair Ethernet Industrial Partner Network

To help advance its Industry 4.0 technologies, Molex joins other technology suppliers in supporting the adoption of an Ethernet technology that reduces wiring requirements and enables miniaturization.

Screen Shot 2020 06 30 At 1 06 32 Pm

Conducting Virtual FATs: Best Practices

Brand-new guidance from PMMI's OpX Leadership Network addresses the critical need for virtual factory acceptance testing during the COVID-19 pandemic.

Bhbw G Bvn 480 5efb4d83be093

How Aveva Insights is Used in Schneider Electric's Batam Factory

Learn how Aveva Insights software is used to monitor machine operating parameters and send alerts if operating parameters are not within set levels. Also see how machines are retrofitted for IIoT with plug-and-play sensors and edge computing technology.

Screen Shot 2020 06 29 At 5 39 26 Pm

Packaging Robotics Playbook

This new playbook from Packaging World showcases the trends, case studies, and how-to tips to help you make the best possible robot purchasing and application decisions for your operation.

Luigi De Bernardini, CEO at Autoware, and president Autoware Digital,

Operations & Supply Chains After COVID-19

How supply chain operations and processes will need to change to have the best chance of success after the coronavirus, and where system integrators can play a role in the transition.

Enterprise Connectivity and Home Version Announced for Ignition

The Ignition software platform from Inductive Automation can now connect more easily to SAP ERP systems; also a personal home version of the software is available for the maker community.

Urplus Application Kits Some Post 1200x1200 Preview

Application Kits for Cobots

Expanding its UR+ platform, Universal Robots adds software and hardware kits for collaborative robot applications.

Getty Images 934890340

Digitization and Adaptation to a Changing World

The Aveva World digital conference focused on the factors accelerating industry’s digital transformation and how Aveva is not only supplying the technologies to support this, but using them to transform the way they do business themselves.

STR in Isaac Sim with dolly.

BMW Outfits Robots with Artificial Intelligence

To help produce its custom-configured cars more rapidly, BMW used Nvidia’s Isaac robotics platform to add advanced computing and visualization to its factory logistics robots.

Day one of go live with the upgraded ERP system at Avery’s manufacturing site in Northampton, UK.

ERP Upgrade Enables Direct-to-Consumer Model for Avery

QAD’s latest cloud-based enterprise resource planning system has helped Avery better integrate its operations to provide the flexibility needed to depart from its traditional big box pallet model.

Emerson Adds Augmented Reality for Asset Management

This summer’s update to Plantweb Optics will include augmented reality capabilities to help users locate troublesome assets and correct issues with the aid of experts via real-time collaboration.

Georgia Pacific Facility

Georgia-Pacific’s Approach to IT/OT Convergence

Like many industrial organizations, Georgia-Pacific was struggling with the loss of operating expertise created by a retiring workforce. Coordinating the company’s IT and OT departments is helping to solve the issue and improve the way the company operate

Siemens Teamcenter X (1)

Closing the Loop Between CAD, PLM, Digital Twins, and the Cloud

Siemens Digital Industries Software adds to its Xcelerator portfolio to enhance design, engineering, and manufacturing software, and partners with IBM on service lifecycle management.

Paula Hollywood, senior analyst, ARC Advisory Group

The Road to Reducing Unplanned Events

Reducing unplanned events is high on the priority list of many industrial facilities. However, it is possible to leverage technology and talent to optimize an organization to reducing these events.

Screen Shot 2020 06 17 At 9 31 39 Am

Doosan Bobcat Moves from Paper-Based to Digital Production

Implementation of FactoryTalk InnovationSuite is helping Doosan Bobcat create a five-year technology advancement program to take its operations digital and enable data-driven decision-making at all levels.

Advanced polymers, synthetic rubber, fertilizers, metallocene plastomers, polyethelenes, and engineering thermoplastics are among the products made at the Chemelot campus.

By Seeing Patterns, Analytics Software Models Improve Process Control

Translating raw data into usable information has been a difficult task for industrial companies. Using TrendMiner, a self-service industrial data analytics software, Sitech was able to overcome this problem.

Lights Out Mfg2

Technology Matters: Wearable Sensors, Vision Systems, Industrial Networking

In this episode we look at wearable sensor technologies for social distancing, using vision systems to inspect liquids and solids, and the rise of publish/subscribe communication protocols in industrial networking.

More in Home

Noosa Production2

Noosa Yoghurt Cuts Downtime, Product Loss With Valve Upgrade

The TrueClean CIP’able air blow check valve from Central States Industrial enabled the yogurt maker to save hours of downtime and many pounds of product every week, with an expected savings of $350,000 a year.

Is The Digital Transformation Changing Industry’s Approach to Quality?

An update to the Automation World survey on the use of automation for quality inspections detects some surprising changes in the era of digitalization. Quality may be becoming associated more with process feedback than classical inspection technologies.

Steve J. Malyszko, P.E., CEO, Malisko Engineering

COVID-19 Spawns New Opportunities for Increasing Efficiencies

Though the coronavirus has put a lot of projects on hold, virtual conferencing, screen sharing, and remote access have changed the way system integrators are interacting and working with clients.

Does OEE Have a Role in the Digital Transformation?

In this episode, we connect with Sam Russem of Grantek to get a better understanding of Overall Equipment Effectiveness (OEE) metrics, how they're applied, and the impact on the digital transformation of industry.

Brian R. May, managing director, Industrial North America, Accenture.

COVID-19—Let’s Look Beyond Today

As the coronavirus continues to shift the way manufacturing organizations operate, figuring out how to get staff back onto the line while maintaining proper safety standards is a crucial first step to reopening.

Software as a Service Enters Engineering and Manufacturing Circles

PTC introduces Atlas, a SaaS-based product development platform, and teams up with Rockwell Automation and Microsoft to deliver Factory Insights as a Service.

Digital Twin Consortium Founded

Ansys, Dell, and Microsoft are among the founding members of a new consortium created to develop standard terminology and reference architectures around digital twin technology, in addition to sharing use cases across industries.

Why Conveyance Technologies Remain an Industry Lynchpin

Conveyor technology is no longer just about moving goods and components back and forth. Automation advances are transforming it into a core aspect of production strategy.

Getty Images 1031162078

Inspecting Liquids and Solids with Vision Systems

Understanding the different components that comprise a vision system and how they can be used for different inspection applications is critical to justifying an investment in vision technology.

Technology Matters: Remote Access, Virtual Workforce Training, and Functional Machine Safety

A review of automation technology developments recently covered by Automation World to help you stay on top of what’s happening in the world of industrial automation.

Sony Imx500 Sensor Header 640x360@2x

Sony and Microsoft Partner on Smart Cameras

To help industrial companies address the challenges that come with deploying and accessing video analytics and vision systems, Sony and Microsoft have begun collaborating to make these systems more accessible.

Getty Images 1218111445

Where the Pandemic Is Impacting Automation

Though it’s still too early to tell for certain, distinct technology areas—ranging from 5G, cloud/edge, and artificial intelligence to articulated robots—are expected to grow significantly in response to the business impacts of COVID-19.