Compact Ethernet Switches/Media Converters

The WAVELine series of Class 1, Div 2 approved unmanaged Industrial Ethernet switches and media converters are offered in new compact housings to provide increased design and installation flexibility.

May 8th, 2008
Aw 3783 Wied E

Designed as compact plug-and-play modules, the series allows for easy creation of Industrial Ethernet networks because no configuration or set up is required, says the vendor. These slim switches feature housings of 22.5mm or 45mm width, while several new port configurations comprised of both RJ45 copper and fiber optic connections provide users greater application flexibly. The following port configurations are available: three RJ45 10/100 ports; three RJ45 10/100 ports and one SC fiber optic port; three RJ45 10/100 ports and one ST fiber optic port; five RJ 45 10/100 ports; six RJ45 10/100 ports and one SC fiber optic port; six RJ45 10/100 ports and one ST fiber optic port; and eight RJ45 10/100 ports The media converters feature Auto Link detection, which monitors the link status on the I/O ports.

Weidmuller
www.weidmuller.com
800.849.9343
 

Screen Shot 2020 07 13 At 4 00 45 Pm
Siemens and SAP Integrate Software Applications
To deliver software that can address asset management, supply chain, and product lifecycle operations, SAP and Siemens have created a new partnership to help drive industry’s digital transformation.
Jul 14th, 2020
Screwdriver B Bit Qc
Plug-and-Play Intelligent Robot Screwdriver
OnRobot releases its Screwdriver product with precise torque control for repetitive assembly applications.
Jul 14th, 2020
Brian Fenn is vice president of operations, at Avanceon
Manufacturing Data: “Like a Mule with a Spinning Wheel”
Data storage is cheap, but not all data is valuable. Being able to collect, breakdown, and analyze any and all potentially valuable and actionable information is integral to any manufacturer.
Jul 13th, 2020
With more than 1,000 disks on each sheet, disk picking by hand was extremely time-consuming.
Delta Robot Eases Encoder Disk Production
US Digital operators can focus on more important tasks while a new robotic workstation handles disk-picking duty for the company’s new optical kit encoder.
Jul 10th, 2020
Dr. Ananth Seshan, member, International Board of Directors, MESA International
Digital Transformation for Small and Medium Manufacturers
Small and medium manufacturers have largely been hesitant to make the transition to a smart manufacturing system due to concerns over the cost and time investment. However, those hesitations may not actually be true when the implementation is done right.
Jul 9th, 2020
Larry White, executive director, Resource Consumption Accounting Institute
Effective Manufacturing Analytics Need Finance and IT
As digital manufacturing continues to expand, and the associated advanced analytics capabilities, organizations need to align information technology, finance, and manufacturing resources to ensure that the business is successful.
Jul 9th, 2020
Screen Shot 2020 07 07 At 11 20 37 Am
Smart Glasses for Remote Assistance at Schneider Electric Batam Factory
A look at how workers at Schneider Electric's Batam, Indonesia, factory use Smart Glasses Remote Assistance to connect with third-party OEMs for help with equipment troubleshooting, maintenance, and repair.
Jul 9th, 2020
Getty Images 534056772
How Automation Advances Affect OEE
Overall Equipment Effectiveness is a long-used equation to determine the effectiveness of production machines. But as automation technologies—and their associated analytic capabilities—rapidly advance, what role does OEE serve as industry digitizes?
Jul 8th, 2020
2007 F2 1
Next-Generation Andon
The ‘Christmas-tree’ stack lights of yore are all grown up. Thanks to the rise of smart communication technologies, today’s Andon systems are IIoT- and intelligent-messaging-enabled indicators of real-time shop-floor KPI performance.
Jul 7th, 2020
Brian Reynolds, senior director of engineering at Honeywell Process Solutions demonstrates how Honeywell's Experion PKS controller backup mesh works.
Changing the Controller Redundancy Paradigm
Honeywell highlights how its Experion PKS HIVE products are designed to change industry’s approach to controller redundancy by creating a mesh of controllers in which backup can be provided by any available controller’s compute power.
Jul 7th, 2020
Daren Dielman, Director of Operations, Interstates
The Value of a Peer Group
Coming into any industry without much background knowledge or experience can be difficult. A peer group can help ease the transition through idea sharing and general conversations of the specific industry by peers with a deeper knowledge base.
Jul 6th, 2020
Discover the Secrets of a Successful Automation Project
Sponsored
Discover the Secrets of a Successful Automation Project
Learn about planning and project management, building your machine or automated system, and technologies to improve manufacturing outcomes. Automation World’s free resource features 150 pages on managing automation projects from start to finish.
Jul 1st, 2020
Mes
Technology Matters: Automated Quality, Valves, Software as a Service
In this episode we look at how quality inspections are evolving in light of new automation technologies, how CIP valves helped reduce downtime and waste for Noosa Yoghurt, and how the rise of software as a service is changing industrial software.
Jul 2nd, 2020
Mqtt Sparkplug
Delivering IIoT Data Across the Enterprise
How the Sparkplug Working Group is defining data transmitted using MQTT for use by any system, anywhere.
Jul 1st, 2020
Industrial Ethernet cable from Molex.
Molex Joins Single Pair Ethernet Industrial Partner Network
To help advance its Industry 4.0 technologies, Molex joins other technology suppliers in supporting the adoption of an Ethernet technology that reduces wiring requirements and enables miniaturization.
Jul 1st, 2020
Screen Shot 2020 06 30 At 1 06 32 Pm
Conducting Virtual FATs: Best Practices
Brand-new guidance from PMMI's OpX Leadership Network addresses the critical need for virtual factory acceptance testing during the COVID-19 pandemic.
Jun 30th, 2020
Bhbw G Bvn 480 5efb4d83be093
How Aveva Insights is Used in Schneider Electric's Batam Factory
Learn how Aveva Insights software is used to monitor machine operating parameters and send alerts if operating parameters are not within set levels. Also see how machines are retrofitted for IIoT with plug-and-play sensors and edge computing technology.
Jun 30th, 2020
Screen Shot 2020 06 29 At 5 39 26 Pm
Packaging Robotics Playbook
This new playbook from Packaging World showcases the trends, case studies, and how-to tips to help you make the best possible robot purchasing and application decisions for your operation.
Jun 29th, 2020
Luigi De Bernardini, CEO at Autoware, and president Autoware Digital,
Operations & Supply Chains After COVID-19
How supply chain operations and processes will need to change to have the best chance of success after the coronavirus, and where system integrators can play a role in the transition.
Jun 29th, 2020
Primary
Enterprise Connectivity and Home Version Announced for Ignition
The Ignition software platform from Inductive Automation can now connect more easily to SAP ERP systems; also a personal home version of the software is available for the maker community.
Jun 26th, 2020
More in Home
Urplus Application Kits Some Post 1200x1200 Preview
Application Kits for Cobots
Expanding its UR+ platform, Universal Robots adds software and hardware kits for collaborative robot applications.
Jun 26th, 2020
Getty Images 934890340
Digitization and Adaptation to a Changing World
The Aveva World digital conference focused on the factors accelerating industry’s digital transformation and how Aveva is not only supplying the technologies to support this, but using them to transform the way they do business themselves.
Jun 25th, 2020
STR in Isaac Sim with dolly.
BMW Outfits Robots with Artificial Intelligence
To help produce its custom-configured cars more rapidly, BMW used Nvidia’s Isaac robotics platform to add advanced computing and visualization to its factory logistics robots.
Jun 24th, 2020
Day one of go live with the upgraded ERP system at Avery’s manufacturing site in Northampton, UK.
ERP Upgrade Enables Direct-to-Consumer Model for Avery
QAD’s latest cloud-based enterprise resource planning system has helped Avery better integrate its operations to provide the flexibility needed to depart from its traditional big box pallet model.
Jun 23rd, 2020
Img 0391
Emerson Adds Augmented Reality for Asset Management
This summer’s update to Plantweb Optics will include augmented reality capabilities to help users locate troublesome assets and correct issues with the aid of experts via real-time collaboration.
Jun 23rd, 2020
Georgia Pacific Facility
Georgia-Pacific’s Approach to IT/OT Convergence
Like many industrial organizations, Georgia-Pacific was struggling with the loss of operating expertise created by a retiring workforce. Coordinating the company’s IT and OT departments is helping to solve the issue and improve the way the company operate
Jun 19th, 2020
Siemens Teamcenter X (1)
Closing the Loop Between CAD, PLM, Digital Twins, and the Cloud
Siemens Digital Industries Software adds to its Xcelerator portfolio to enhance design, engineering, and manufacturing software, and partners with IBM on service lifecycle management.
Jun 18th, 2020
Paula Hollywood, senior analyst, ARC Advisory Group
The Road to Reducing Unplanned Events
Reducing unplanned events is high on the priority list of many industrial facilities. However, it is possible to leverage technology and talent to optimize an organization to reducing these events.
Jun 18th, 2020
Screen Shot 2020 06 17 At 9 31 39 Am
Doosan Bobcat Moves from Paper-Based to Digital Production
Implementation of FactoryTalk InnovationSuite is helping Doosan Bobcat create a five-year technology advancement program to take its operations digital and enable data-driven decision-making at all levels.
Jun 18th, 2020
Advanced polymers, synthetic rubber, fertilizers, metallocene plastomers, polyethelenes, and engineering thermoplastics are among the products made at the Chemelot campus.
By Seeing Patterns, Analytics Software Models Improve Process Control
Translating raw data into usable information has been a difficult task for industrial companies. Using TrendMiner, a self-service industrial data analytics software, Sitech was able to overcome this problem.
Jun 17th, 2020
Lights Out Mfg2
Technology Matters: Wearable Sensors, Vision Systems, Industrial Networking
In this episode we look at wearable sensor technologies for social distancing, using vision systems to inspect liquids and solids, and the rise of publish/subscribe communication protocols in industrial networking.
Jun 17th, 2020
Noosa Production2
Noosa Yoghurt Cuts Downtime, Product Loss With Valve Upgrade
The TrueClean CIP’able air blow check valve from Central States Industrial enabled the yogurt maker to save hours of downtime and many pounds of product every week, with an expected savings of $350,000 a year.
Jun 11th, 2020