Dual Ports for Ethernet Redundancy

Nov. 12, 2007
The JetPort 5604i is a 4-port Isolation Redundant Serial Device Server. Users can use one IP address and Redundant Ethernet paths (RTTD Technology) to control a maximum of 4 serial devices over Ethernet.

JetPort 5604i series servers are also equipped with two types of power inputs, four 5V TTL Digital Inputs and two Digital Outputs. The servers provide 2KV isolation protection for critical industrial environments.
The JetPort 5604i series provides dual Ethernet ports. When the dual Ethernet ports are connected, only one path will be activated; this is known as Primary path. The unactivated path will be the backup path. When the primary path is down, the backup path will recover Ethernet connection in less than 200ms.
Korenix Technology
www.korenix.com
+886.2.8219.3000

Sponsored Recommendations

Optimize food production with SEW-EURODRIVE’s hygienic, energy-efficient automation and drive solutions for precision, reliability, and sustainability.
George Reed, with the help of Factory Technologies, was looking to further automate the processes at its quarries and make Ignition an organization-wide standard.
Goodnight Midstream chose Ignition because it could fulfill several requirements: data mining and business intelligence work on the system backend; powerful Linux-based edge deployments...
In the automation world, the Purdue Model (also known as the Purdue reference model, Purdue network model, ISA 95, or the Automation Pyramid) is a well-known architectural framework...