EXAIR Electronic Press Release - Small NEMA 12 Cabinet Coolers Resist Heat And Dirt

EXAIR's new small NEMA 12 Cabinet Cooler Systems keep electrical enclosures cool with 20°F (-7°C) air while resisting heat and dirty environments that could adversely affect the internal components.

This content was submitted directly to this website by the supplier.

Apr 16th, 2014
Aw 21998 Nema12pr 2mb
EXAIR's new small NEMA 12 Cabinet Cooler Systems keep electrical enclosures cool with 20°F (-7°C) air while resisting heat and dirty environments that could adversely affect the internal components. This durable Cabinet Cooler system provides a low cost, easy to install, maintenance free solution for enclosures in hot, remote and/or dirty environments. The cooling capacity of up to 275 Btu/hr. is ideal for small electrical enclosures with problematic overheating. Models with higher cooling capacities are available.
 
EXAIR Cabinet Coolers circulate 20°F (-7°C) air throughout the enclosure to prevent high temperature malfunctions. They mount through a standard electrical knockout while maintaining the NEMA 12, 4 or 4X rating of the enclosure. Cabinet Cooler Systems include an automatic drain filter separator to ensure no moisture passes to the inside of the electrical enclosure. An optional thermostat control minimizes compressed air use and keeps the enclosure at ± 2ºF of the setting.
 
Small NEMA 12 Cabinet Cooler Systems are available with 275, and 550 Btu/Hr and are UL listed and CE compliant. There are no moving parts to wear out. Applications include cooling control panels, PLC’s, microprocessors, fractional Hp variable frequency drives, and robotics. Prices start at $282.00.
 
>> For more information on this product, click here
 
Timothy S. Matheny, P.E., President, ECS Solutions
Manufacturing Digitalization That Works
Though digitalization is a process that is often seen as great, the benefits are not the same for everyone. Asking how digitalization is going to benefit your organization may be important to your digital future.
Nov 11th, 2019
Pmmi Cp Gpanel Nov2019
Could OEMs Become Co-Manufacturers?
CPGs are asking machine builders for help as they seek ways to become more agile in the face of e-commerce
Nov 11th, 2019
Diane Murray, Senior Marketing and Research Associate, LNS Research
Industrial Transformation: Six "Ah-Ha" Moments That Might Surprise You
Industrial Transformation has taken over the conversation in many organizations. In this article, you’ll see the biggest “Ah-Ha” moments organizations have had regarding Industrial Transformation.
Nov 10th, 2019
Larry White, Executive Director, Resource Consumption Accounting Institute
Is Finance Helping Your Optimizing Operations?
In order for optimizing operations to move forward, finance needs to work with all of the organization. So, as companies move to optimize, everyone should ask is how finance is helping.
Nov 9th, 2019
Desmond Savage, Manufacturing IT Consultant, Modus IOT
MES is Dead, IIOT has arrived.
If your company is struggling to choose between an MES or IIoT solution, you won’t find the right answers until you begin asking the right questions.
Nov 8th, 2019
Machines that sense the world around them
Sponsored
Machines that sense the world around them
ADI gives cobots the ability to sense, adapt and interpret its surroundings. Our motion detection and machine learning expertise is transforming factory floors. From invention to breakthrough with ADI.
Nov 6th, 2019
Robert Resendez, control and automation team manager at Bechtel Oil, Gas, & Chemicals
Schneider Electric Releases New Line of Intelligent Enclosures
To speed up project execution and decrease the costs that come with plant start-ups, Schneider Electric offers a new generation of intelligent enclosures for Triconex and Foxboro.
Nov 6th, 2019
Untitled
PMMI Announces Second Annual On the Rise Award Winners
Leadership Award Recognizes 12 Young Professionals to Watch in Packaging and Processing
Nov 5th, 2019
Jeff Miller, director of project management, Interstates
Agile in a System Integrator World
From project development to general productivity, having an agile system in a systems integrator world is extremely beneficial. Jeff Miller lays out how your company can benefit from an Agile project delivery methodology.
Nov 4th, 2019
Omron Podcast Image
Selecting Motor, Drive, Controller Combinations
When it comes to multi-component automation systems, is it better to source them all from one vendor or opt for best-of-breed? The answer often depends on the application.
Nov 4th, 2019
“[The idea of] software eating the world and disrupting established vendors is coming to industrial automation.' — Michael Risse, Seeq
Is Software Eating Industry Yet?
Marc Andreeson’s statement about “software eating the world” underscored the changing role of technology in our daily lives. But that change has not yet been nearly as dramatic in the industrial world. Seeq’s Michael Risse thinks that is about to change.
Oct 31st, 2019
Discover the Secrets of a Successful Automation Project
Sponsored
Discover the Secrets of a Successful Automation Project
Learn about planning and project management, building your machine or automated system, and technologies to improve manufacturing outcomes. Automation World’s free resource features 150 pages on managing automation projects from start to finish.
Nov 6th, 2019
Panelists discuss cybersecurity during Schneider Electric's Innovation Days in Austin.
Certification Emphasizes Cybersecurity of Schneider Electric’s Processes
TÜV Rheinland has certified the automation supplier’s Secure Development Lifecycle process to ISA/IEC 62443-4-1 cybersecurity standards. This was a highlight to this week’s Triconex and Foxboro user group meetings in Austin.
Oct 25th, 2019
The SaaS-ification of PTC
The SaaS-ification of PTC
PTC’s pending acquisition of Onshape will add a cloud-based Software as a Service product development platform to the company’s CAD and PLM portfolio.
Oct 24th, 2019
Emerson's AMS Asset Monitor in the field.
Emerson Releases Asset Monitoring Edge Device
The new AMS Asset Monitor edge analytics device is designed to increase asset visibility and provide predictive analytics.
Oct 24th, 2019
Compartment fine positioning – double-depth positioning with IPS 400i
Precise control of double-depth positioning processes
The new IPS 400i from Leuze electronic is the smallest camera-based positioning sensor on the market for double-depth compartment fine positioning. It helps high-bay storage devices to quickly and easily find the right rack.
Supplier Submitted
Oct 23rd, 2019
Sigma Trac II with XY Adapter
Yaskawa Introduces New Generation of Linear Motor Stages
Sigma Trac II linear motor stages provide high performance turnkey linear motor solution
Supplier Submitted
Oct 23rd, 2019
Cube Encoder
Cube Encoders from POSITAL: Updating an Industry Favourite
Cube encoders – incremental rotary encoders with a cube-shaped housing – have been popular with machine builders since the 1960’s, largely because these devices are easy to install without special mounts or brackets. Now POSITAL has updated this old favourite with new features and capabilities that will keep this design relevant for years to come.
Supplier Submitted
Oct 23rd, 2019
GRV-3 modules
Opto 22 Releases Three New groov EPIC I/O Modules
New I/O modules address demands of specialty and low-cost applications, including dry contact monitoring, temperature control and mixed voltage.
Supplier Submitted
Oct 23rd, 2019
EventCam from SICK Provides Fast and Detailed Error Analysis in Industrial Processes
Spontaneous errors in the manufacturing process can be a thing of the past thanks to the new EventCam from SICK. This industrial-grade 2D camera brings clarity when unexplained gripping, handling, and positioning problems arise or when unreproducible installation errors or machine downtimes occur.
Supplier Submitted
Oct 23rd, 2019
More in Home
The OPC Robotics Companion Specification lays the foundation for the integration of industrial robotic systems into the Industrial Internet of Things.
OPC Robotics Specification Released
The OPC Robotics Companion Specification lays the foundation for the integration of industrial robotic systems into the Industrial Internet of Things.
Oct 23rd, 2019
The grinding machine contains one encoder per motor, with one motor per robot axis and absolute inductive rotary encoders with 18-bit resolution for the robot's axis drives.
Machine Tooling System Unveils Dramatic Productivity Increase
A new machine tooling system for Strausak’s U-Grind machines uses an integrated robotic arm with pinpoint encoding technology to increase production capabilities.
Oct 22nd, 2019
ICR-3241
Advantech Releases FirstNet-Certified 4G Industrial Cellular Router for Public Safety and Mission-Critical Applications
Advantech has announced the release of its first 4G industrial cellular router and gateway that is FirstNet certified, the ICR-3241. It offers secure, high-speed Internet access to first responders and others in critical agencies, such as law enforcement, fire departments, traffic management and more.
Supplier Submitted
Oct 22nd, 2019
Photoelectric Sensors added by AutomationDirect for more Distance Applications
4mm (smooth) and 5mm (M5 threaded) round photoelectric sensors are now available from AutomationDirect in a wider range of sensing distances in both diffuse and through-beam sensing configurations.
Supplier Submitted
Oct 22nd, 2019
Water Scarcity Drives Industrial Reclamation Efforts
‘Reduce, reuse, recycle’ is not a mantra only for saving space in landfills. It has become an increasingly necessary push for water management in industrial operations. Here’s why you might need to reconsider your water usage.
Oct 21st, 2019
Nick Bozzelli, staff engineer, Avanceon
Using Split Range Time Proportional with PID Loops
Though pretty complex in nature and difficult to program, there are way more benefits to tuning and using PID loops that can ultimately be incredibly useful when it comes to your development process.
Oct 21st, 2019
The Machine Economy is Upon Us
The Machine Economy is Upon Us
The IOTA Foundation has been working on an IoT communication protocol that will enable machines to autonomously conduct transactions in a fee-free, secure, and trustworthy exchange.
Oct 18th, 2019
Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.
Emerson and the Integration of Process and Discrete Automation
Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.
Oct 17th, 2019
Collaboration without Incident using SICK’s Safe Robotics Area Protection
Safety, flexibility, and productivity for human-robot interaction
Supplier Submitted
Oct 17th, 2019
Red Lion Controls Announces Crimson® 3.1 Enhanced Features
New functionality optimizes data intelligence and drives greater efficiencies on the plant floor
Supplier Submitted
Oct 17th, 2019
Festo Simplified Motion Series
New from Festo – Electric Drives for Simple Motion
These new actuators cost effectively apply electrics for basic motion while IO-Link functionality enables IIoT communication.
Supplier Submitted
Oct 17th, 2019
Join industry experts in panel building for a Control Panel Online Symposium
Siemens, along with industry experts from EPLAN, UL, and CSA will be hosting a Control Panel Online Symposium on December 12th . Registration for this free online event is now open
Supplier Submitted
Oct 17th, 2019
Aveva Integrates EPC Software for Collaboration
Aveva Integrates EPC Software for Collaboration
The integrated portfolio of engineering, procurement, and construction (EPC) software is designed to help customers streamline the way capital-intensive process industry projects are engineered and executed.
Oct 16th, 2019
Are Servo Motor and Drive Combinations from One Vendor Better?
Are Servo Motor and Drive Combinations from One Vendor Better?
In this episode of the 'Automation World Gets Your Questions Answered' podcast series, we connect with Eric Roggeman and Greg Dieck of Omron Industrial Automation to find out if servo motor/drive/controller combinations sourced from one vendor are the best option or if mixing and matching components is preferred.
Oct 15th, 2019