NITRA Current to Pneumatic (I/P) Transducers added by AutomationDirect

July 20, 2017
NITRA NCP Series electro-pneumatic transducers from AutomationDirect convert a 4-20 mA current signal (I) from a PLC or other controller to a linear pneumatic output pressure (P).

Used in paper and paper converting, food and drug, petrochemical, HVAC, textile, and energy management industries, NCP Series I/P transducers provide highly reliable and repeatable operation of pneumatic valve positioners, valve actuators, air cylinders, damper and louver actuators, web tensioners, clutches and brakes.

These NITRA I/P transducers are rated for installation in NEMA 4X (IP65) environments and approved for hazardous locations. The NCP series I/P transducers are available in output pressure ranges up to 120 psig for industrial pneumatic and process control applications.

NCP1 series transducers can be direct or bracket mounted and have a 1/2" NPT female conduit connection with wire leads.

Compact NCP2 series I/P transducers can be direct or bracket mounted and have a 1/2" NPT female conduit connection with wire leads or field wireable DIN 43650 electrical connector; optional pipe and DIN rail mounting kits are also available.

NITRA I/P transducers start at $275.00 and have a 1-year warranty.

For more information, click here >>

Sponsored Recommendations

SEW-EURODRIVE Introduces DR2C motor, IE5 Ultra-Premium Efficiency Motor
Optimize food production with SEW-EURODRIVE’s hygienic, energy-efficient automation and drive solutions for precision, reliability, and sustainability.
George Reed, with the help of Factory Technologies, was looking to further automate the processes at its quarries and make Ignition an organization-wide standard.