Hybrid Cable Entry Possible with New KT-M from icotek
March 1, 2019
With the new KT-M cable grommet from icotek, the built-in plugs and installation jacks are integrated directly into the icotek cable entry strips KEL, KEL-U or KEL-ER.
icotek KT-M
The KT-M is ideal for interfacing to signal, data, power or hybrid connectors by simply screwing them into the threads of the KT-M. Even hose fittings or pressure compensation elements can be easily screwed to the KT-M.
The grommet KT-M is built on the basis of a large KT cable grommet. In this gromeet a polyamide body is integrated. The KT-M is available with inner threads of M12x1.0, M16x1.5, M20x1.5 and M25x1.5. Alternatively, the blind grommet KT-M is available for special solutions. The integrated polyamide body is completely closed on one side. The effective area is 24x24mm, the wall thickness 6mm. Special bores can be made or smaller flange bushes (for example for hybrid device connectors) can be attached. The KT-M is available from now on and can be obtained directly from the manufacturer.
Inductive Automation offers multiple editions of Ignition created for specific use cases. See what differentiates Ignition, Ignition Edge, Ignition Cloud Edition, and Ignition...
Castle & Key brought new life to a historic Kentucky distillery by blending 140 years of heritage with cutting-edge automation. With help from Gray AES, they replaced outdated...
Learn how Inductive University can help you overcome today’s biggest roadblocks in SCADA training, such as prohibitive costs, gated software access, and more.
Forget complex programmingget smarter, faster automation with MOVI?C. With scalable performance, multibus flexibility, and safety built in, its control tech that adapts to ...
