Yokogawa Announces Dates for North America Users Conference and Exhibition 2020

It's time to save the date for the 2020 Yokogawa Users Conference and Exhibition! This valuable educational and networking event has been scheduled for August 31 - September 3, 2020 at the Woodlands Waterway Marriott Hotel & Convention Center in the Woodlands, Texas. Additional details and registration information for the 2020 event will soon be available at www.yokogawausersconference.com.

This content was submitted directly to this website by the supplier.

May 17th, 2019

The North American biennial conference and exhibition provides an unparalleled opportunity for Yokogawa users to network with fellow professionals, industry and business leaders, as well as numerous product and solutions experts. Individuals gain in-depth, quantified insight into how their peers are using automation technologies to deliver industry-leading results that positively impact their bottom line. The 2018 event, held in Orlando over four days in September, attracted hundreds of professionals across multiple industries.

The 12,000-square-foot OpreX Showcase and Exhibition featured solutions across Yokogawa’s extensive portfolio. Eighteen Yokogawa partners contributed to the exhibition showing value-added solutions alongside Yokogawa. Conference attendees had a wide range of sessions to choose from, and there were several impactful keynotes including Adam Stelzner from NASA’s Jet Propulsion Lab, who spoke about collaborative innovation and what it took to get to Mars; “Ram” Ramasamy of Frost & Sullivan, who went in depth about digital transformation and how to be ready for the future of IIoT; and Jeff Warmann of Monroe Energy, who gave insight into how to drive excellence in the face of disruptive forces. The 2020 Users Conference promises another great line up of informative sessions and engaging speakers. Information will be posted on the event website as it becomes available (www.yokogawausersconference.com).

For more information or questions regarding the event, please send email to Sarah.Lopez at us.yokogawa.com

Timothy S. Matheny, P.E., President, ECS Solutions

Manufacturing Digitalization That Works

Though digitalization is a process that is often seen as great, the benefits are not the same for everyone. Asking how digitalization is going to benefit your organization may be important to your digital future.

Pmmi Cp Gpanel Nov2019

Could OEMs Become Co-Manufacturers?

CPGs are asking machine builders for help as they seek ways to become more agile in the face of e-commerce

Diane Murray, Senior Marketing and Research Associate, LNS Research

Industrial Transformation: Six "Ah-Ha" Moments That Might Surprise You

Industrial Transformation has taken over the conversation in many organizations. In this article, you’ll see the biggest “Ah-Ha” moments organizations have had regarding Industrial Transformation.

Larry White, Executive Director, Resource Consumption Accounting Institute

Is Finance Helping Your Optimizing Operations?

In order for optimizing operations to move forward, finance needs to work with all of the organization. So, as companies move to optimize, everyone should ask is how finance is helping.

Desmond Savage, Manufacturing IT Consultant, Modus IOT

MES is Dead, IIOT has arrived.

If your company is struggling to choose between an MES or IIoT solution, you won’t find the right answers until you begin asking the right questions.

Discover the Secrets of a Successful Automation Project

Discover the Secrets of a Successful Automation Project

Learn about planning and project management, building your machine or automated system, and technologies to improve manufacturing outcomes. Automation World’s free resource features 150 pages on managing automation projects from start to finish.

Robert Resendez, control and automation team manager at Bechtel Oil, Gas, & Chemicals

Schneider Electric Releases New Line of Intelligent Enclosures

To speed up project execution and decrease the costs that come with plant start-ups, Schneider Electric offers a new generation of intelligent enclosures for Triconex and Foxboro.

PMMI Announces Second Annual On the Rise Award Winners

Leadership Award Recognizes 12 Young Professionals to Watch in Packaging and Processing

Jeff Miller, director of project management, Interstates

Agile in a System Integrator World

From project development to general productivity, having an agile system in a systems integrator world is extremely beneficial. Jeff Miller lays out how your company can benefit from an Agile project delivery methodology.

Omron Podcast Image

Selecting Motor, Drive, Controller Combinations

When it comes to multi-component automation systems, is it better to source them all from one vendor or opt for best-of-breed? The answer often depends on the application.

“[The idea of] software eating the world and disrupting established vendors is coming to industrial automation.' — Michael Risse, Seeq

Is Software Eating Industry Yet?

Marc Andreeson’s statement about “software eating the world” underscored the changing role of technology in our daily lives. But that change has not yet been nearly as dramatic in the industrial world. Seeq’s Michael Risse thinks that is about to change.

Keerthi Duraikkannan, site manager

Decentralizing Tribal Knowledge in Your Team

While it's great to have experts on your team, tribal knowledge can cause major problems to your workflow as teams get reorganized. These tips will help you manage and avoid tribal knowledge before it becomes an issue.

Panelists discuss cybersecurity during Schneider Electric's Innovation Days in Austin.

Certification Emphasizes Cybersecurity of Schneider Electric’s Processes

TÜV Rheinland has certified the automation supplier’s Secure Development Lifecycle process to ISA/IEC 62443-4-1 cybersecurity standards. This was a highlight to this week’s Triconex and Foxboro user group meetings in Austin.

The SaaS-ification of PTC

The SaaS-ification of PTC

PTC’s pending acquisition of Onshape will add a cloud-based Software as a Service product development platform to the company’s CAD and PLM portfolio.

Emerson's AMS Asset Monitor in the field.

Emerson Releases Asset Monitoring Edge Device

The new AMS Asset Monitor edge analytics device is designed to increase asset visibility and provide predictive analytics.

Compartment fine positioning – double-depth positioning with IPS 400i

Precise control of double-depth positioning processes

The new IPS 400i from Leuze electronic is the smallest camera-based positioning sensor on the market for double-depth compartment fine positioning. It helps high-bay storage devices to quickly and easily find the right rack.

Sigma Trac II with XY Adapter

Yaskawa Introduces New Generation of Linear Motor Stages

Sigma Trac II linear motor stages provide high performance turnkey linear motor solution

Cube Encoders from POSITAL: Updating an Industry Favourite

Cube encoders – incremental rotary encoders with a cube-shaped housing – have been popular with machine builders since the 1960’s, largely because these devices are easy to install without special mounts or brackets. Now POSITAL has updated this old favourite with new features and capabilities that will keep this design relevant for years to come.

Opto 22 Releases Three New groov EPIC I/O Modules

New I/O modules address demands of specialty and low-cost applications, including dry contact monitoring, temperature control and mixed voltage.

EventCam from SICK Provides Fast and Detailed Error Analysis in Industrial Processes

Spontaneous errors in the manufacturing process can be a thing of the past thanks to the new EventCam from SICK. This industrial-grade 2D camera brings clarity when unexplained gripping, handling, and positioning problems arise or when unreproducible installation errors or machine downtimes occur.

More in Home

The OPC Robotics Companion Specification lays the foundation for the integration of industrial robotic systems into the Industrial Internet of Things.

OPC Robotics Specification Released

The OPC Robotics Companion Specification lays the foundation for the integration of industrial robotic systems into the Industrial Internet of Things.

The grinding machine contains one encoder per motor, with one motor per robot axis and absolute inductive rotary encoders with 18-bit resolution for the robot's axis drives.

Machine Tooling System Unveils Dramatic Productivity Increase

A new machine tooling system for Strausak’s U-Grind machines uses an integrated robotic arm with pinpoint encoding technology to increase production capabilities.

Advantech Releases FirstNet-Certified 4G Industrial Cellular Router for Public Safety and Mission-Critical Applications

Advantech has announced the release of its first 4G industrial cellular router and gateway that is FirstNet certified, the ICR-3241. It offers secure, high-speed Internet access to first responders and others in critical agencies, such as law enforcement, fire departments, traffic management and more.

Photoelectric Sensors added by AutomationDirect for more Distance Applications

4mm (smooth) and 5mm (M5 threaded) round photoelectric sensors are now available from AutomationDirect in a wider range of sensing distances in both diffuse and through-beam sensing configurations.

Water Scarcity Drives Industrial Reclamation Efforts

‘Reduce, reuse, recycle’ is not a mantra only for saving space in landfills. It has become an increasingly necessary push for water management in industrial operations. Here’s why you might need to reconsider your water usage.

Nick Bozzelli, staff engineer, Avanceon

Using Split Range Time Proportional with PID Loops

Though pretty complex in nature and difficult to program, there are way more benefits to tuning and using PID loops that can ultimately be incredibly useful when it comes to your development process.

The Machine Economy is Upon Us

The Machine Economy is Upon Us

The IOTA Foundation has been working on an IoT communication protocol that will enable machines to autonomously conduct transactions in a fee-free, secure, and trustworthy exchange.

Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.

Emerson and the Integration of Process and Discrete Automation

Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.

Collaboration without Incident using SICK’s Safe Robotics Area Protection

Safety, flexibility, and productivity for human-robot interaction

Red Lion Controls Announces Crimson® 3.1 Enhanced Features

New functionality optimizes data intelligence and drives greater efficiencies on the plant floor

Festo Simplified Motion Series

New from Festo – Electric Drives for Simple Motion

These new actuators cost effectively apply electrics for basic motion while IO-Link functionality enables IIoT communication.

Join industry experts in panel building for a Control Panel Online Symposium

Siemens, along with industry experts from EPLAN, UL, and CSA will be hosting a Control Panel Online Symposium on December 12th . Registration for this free online event is now open

Aveva Integrates EPC Software for Collaboration

Aveva Integrates EPC Software for Collaboration

The integrated portfolio of engineering, procurement, and construction (EPC) software is designed to help customers streamline the way capital-intensive process industry projects are engineered and executed.

Are Servo Motor and Drive Combinations from One Vendor Better?

Are Servo Motor and Drive Combinations from One Vendor Better?

In this episode of the 'Automation World Gets Your Questions Answered' podcast series, we connect with Eric Roggeman and Greg Dieck of Omron Industrial Automation to find out if servo motor/drive/controller combinations sourced from one vendor are the best option or if mixing and matching components is preferred.