Branch Tees

TURCK introduces h-style (3-branch) and H-style (4-branch) M16 tees, ideal for saving valuable field installation time and hassle in comparison to hardwired cable tray installations.

This content was submitted directly to this website by the supplier.

Nov 3rd, 2010

Aw 1283 1011 Turck Pr

The tees are available in a multitude of configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.

An IP67 rating, plus a rugged PUR overmold and PVC flexlife® cable jacket make these tees well-suited for harsh industrial environments. Tees are offered in varieties with 2 through 8-pin connectors in nickel-plated brass, stainless steel or nylon, and they are rated for up to 600 Volts and 18 Amps.

TURCK - www.turck.us

Brx Family Features 800

Expanded Communications and Analog I/O Capabilities for the BRX PLC

Pm Plus Front 1563

Temperature Controller is Easy to Use

The PM PLUS from Watlow is more intuitive than its predecessor and features an improved user interface.

2003np Schneider

Advanced Power Quality Meter

The PowerLogic ION9000T from Schneider Electric adds high-speed transient capture capabilities, helping critical facilities avoid outages, equipment damage, failures, and interruption of operations.

Wet Gas Flow Sensor

FCI's Gas Master Sensor for the ST80 Series flow meters delivers accurate, repeatable gas flow measurement in the presence of even more moisture and condensation droplets.

All-in-One IIOT Controller

The EX700 series from Exor provides multiple functions in one unit.

Industrial Controller Has the Power of a PC

The X20CP3687X controller from B&R combines the performance of an industrial PC with the compact design of the company’s X20 controller series.

Pilotless, Spring-loaded Back Pressure Valve

The Daniel V707 valve increases reliability and reduces spill risks for the crude oil industry.

Nod Wba C0 1280 5e5822dbc384a

Emerson Automation Solutions' Edge Virtualization

In this video, Rich Carpenter of Emerson Automation Solutions explains why the company virtualizes its edge devices to take advantage of the multiple cores to perform multiple independent functions on the same device.

Maxon Epos4 Micro 24 5 Can 450px

EPOS4 Micro 24/5 CAN Miniaturized Controller

The EPOS4 Micro 24/5 CAN miniaturized controller from maxon offers the functionality of the existing products in the EPOS4 range but with a smaller form size.

Osa +flow Per01

Bedrock Automation Integrates Flow Measurement Software

With the addition of Flow-Cal algorithms, Bedrock Automation’s platform adds oil and gas measurement and secure custody transfer capabilities.

Pro Open Cpu 5x7

ProductivityOpen Arduino-compatible Controller from AutomationDirect

AutomationDirect is a distributor offering thousands of industrial automation products for electrical control systems, including PLCs, operator interfaces, AC drives, motors, stepper systems, sensors, motor controls, enclosures and more.

Robot and Controller for Harsh Environments

ABB’s IRB 1100 robot, powered by the new OmniCore C90XT controller, is IP67-rated.

Ira Sharp, Director of Product Marketing—Automation, Phoenix Contact USA

A New Generation of PLCs for a New Generation of Engineers

The Industrial Internet of Things demands more data than ever before from systems and processes that have traditionally not been connected to business systems. The end goal is to provide continuity between different systems and make better use of machines

Variable Frequency Drives Have Low-Environmental Impact

The VFD AFE transformerless medium-voltage drives of the SVFH series from Nidec ASI claim extremely high efficiency and can be connected quickly and directly to the grid.

Four-Channel SFP Gigabit Ethernet Interface

The XMC477RC XMC from Abaco supports four SFP (Small Form Factor Pluggable) modules for maximum flexibility, providing a choice between 1000BASE-X optical or 1000BASE-T copper connectivity.

Top Articles of 2019: Open Source Computing

Coverage of Hilscher’s industrialized Raspberry Pi platform is one of Automation World’s top 5 articles of the year.

Siemens demonstrated “flexible grasping” using AI and neural network processing.

Top Articles of 2019: Artificial Intelligence

Coverage of Siemens addition of artificial intelligence via neural networks to traditional control programs is one of Automation World’s top 5 articles of the year.

Getty Images 1146877220 (1)

Connecting PLCs for High-Speed Packaging Quality

Stone Technologies creates an effective automated defect rejection process requiring deterministic communication between controllers on separate parts of a high-speed packaging line.

Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.

Emerson and the Integration of Process and Discrete Automation

Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.

Are Servo Motor and Drive Combinations from One Vendor Better?

Are Servo Motor and Drive Combinations from One Vendor Better?

In this episode of the 'Automation World Gets Your Questions Answered' podcast series, we connect with Eric Roggeman and Greg Dieck of Omron Industrial Automation to find out if servo motor/drive/controller combinations sourced from one vendor are the best option or if mixing and matching components is preferred.

More in Control

Motion Failure Alarm Facilitates Commissioning and Configuration

Motion Failure Alarm Facilitates Commissioning and Configuration

The Sitrans WM300 (MFA) motion failure alarm from Siemens detects changes in the motion and speed of rotating, reciprocating, or conveying equipment.

Virtual Sensor Reads Safe Speed

Virtual Sensor Reads Safe Speed

The Safe Speed Observer from B&R determines speed of the company’s Acopos P3 servo drive in accordance with SIL 2 / PL d / CAT 3 requirements.

Remote HMI Without Attached Display

Remote HMI Without Attached Display

The EA9-RHM headless C-more Remote Human-Machine Interface from AutomationDirect provides all the functionality of an EA9 touch panel without the extra cost of a touchscreen interface.

Pigler Automation Tests Siemens' Next-Gen DCS

Pigler Automation Tests Siemens' Next-Gen DCS

While the Simatic PCS neo was in development, the company enlisted the help of its integration partner to be a pilot user of the new control software.

Evergreen UV's EDU with Lascar Electronics' PanelPilotAce HMI as the device interface.

HMIs Play Role in Portable Disinfection

Evergreen UV expands the functionality and accuracy of its air and surface disinfection devices with the incorporation of HMIs from Lascar Electronics.

Aw 403831 Thumbnail 2 9041d025 V2

Schneider Electric Unveils IIoT-Ready PLCs, AR, and Motion

Demos of IIoT box as server for hands-free augmented reality and next-generation of motor controls.

Wireless IO-Link Master For Remote Motion Control

SMC’s next-gen wireless base module gets reduced in size and adds flexible connectivity capabilities.

Peter J. Photos of Streamline Innovations in front of a live HMI view from one the company's processing plants.

Today’s Digital Transformation Reality

Dana Inc. and Streamline Innovations show how digital transformations can start today in the discrete and process industries using Ignition to overcome legacy infrastructure’s digital shortcomings.

Making the Plant a Safe Place

Making the Plant a Safe Place

Manufacturers and OEMs must understand that there are many sides to machine safety, including standards, regulations, functional requirements, technology, and even unforeseen circumstances.

Beckhoff’s XTS (eXtended Transport System) linear transport system.

Improving Material Handling Capabilities

Increased collaboration among mechanical, electrical, and software engineers at machine builders has led to a number of advances in material handling automation technology, like Beckhoff’s XTS linear transport system.

Brian DeFanti, project engineer, Avanceon

Are you Protecting your Most Valuable Assets?

Safety in manufacturing is nothing new. And though an investment in safety can do so much for a manufacturing plant, it’s something that can easily be ignored or pushed to the side.

Nonroutine work is any action that is out of the norm where the chance of error is increased. Image courtesy of OpX Leadership Network

Understanding Safety in Nonroutine Work

When a safety program is well-executed and well-maintained, it becomes part of a company’s core values and culture. Employee well-being is paramount, and no production schedule is worth a safety mishap.