EtherNet/IP Simplifies Robot Integration

A new EtherNet/IP option for the vendor’s RC7 robot controller allows a single cable to connect the robot controller with a programmable logic controller (PLC), which simplifies integration and reduces the cost of robot set-up and hardware.

Feb 9th, 2010
Aw 2125 1002 E Denso

The EtherNet/IP cable quickly and easily plugs into a dedicated port on both the robot controller and PLC, eliminating the need to hand-wire and route parallel I/O terminals, which can amount to dozens or even hundreds for a single robot. “Especially when multiple robots are involved, EtherNet/IP can drastically cut set-up time and hardware costs. Having only one cable per robot also makes integration easier,” said Peter Cavallo, robotics sales manager at the vendor.

Denso Robotics
www.densorobotics.com
88.4.ROBOTX

Subscribe to Automation World's RSS Feeds for Products

Brx Family Features 800
Expanded Communications and Analog I/O Capabilities for the BRX PLC
Mar 27th, 2020
Pm Plus Front 1563
Temperature Controller is Easy to Use
The PM PLUS from Watlow is more intuitive than its predecessor and features an improved user interface.
Mar 18th, 2020
2003np Schneider
Advanced Power Quality Meter
The PowerLogic ION9000T from Schneider Electric adds high-speed transient capture capabilities, helping critical facilities avoid outages, equipment damage, failures, and interruption of operations.
Mar 18th, 2020
2003np Fci
Wet Gas Flow Sensor
FCI's Gas Master Sensor for the ST80 Series flow meters delivers accurate, repeatable gas flow measurement in the presence of even more moisture and condensation droplets.
Mar 18th, 2020
2003np Exor
All-in-One IIOT Controller
The EX700 series from Exor provides multiple functions in one unit.
Mar 18th, 2020
2003np B&r
Industrial Controller Has the Power of a PC
The X20CP3687X controller from B&R combines the performance of an industrial PC with the compact design of the company’s X20 controller series.
Mar 18th, 2020
2003np Emerson
Pilotless, Spring-loaded Back Pressure Valve
The Daniel V707 valve increases reliability and reduces spill risks for the crude oil industry.
Mar 18th, 2020
Nod Wba C0 1280 5e5822dbc384a
Emerson Automation Solutions' Edge Virtualization
In this video, Rich Carpenter of Emerson Automation Solutions explains why the company virtualizes its edge devices to take advantage of the multiple cores to perform multiple independent functions on the same device.
Feb 27th, 2020
Maxon Epos4 Micro 24 5 Can 450px
EPOS4 Micro 24/5 CAN Miniaturized Controller
The EPOS4 Micro 24/5 CAN miniaturized controller from maxon offers the functionality of the existing products in the EPOS4 range but with a smaller form size.
Feb 12th, 2020
Osa +flow Per01
Bedrock Automation Integrates Flow Measurement Software
With the addition of Flow-Cal algorithms, Bedrock Automation’s platform adds oil and gas measurement and secure custody transfer capabilities.
Feb 10th, 2020
Pro Open Cpu 5x7
ProductivityOpen Arduino-compatible Controller from AutomationDirect
AutomationDirect is a distributor offering thousands of industrial automation products for electrical control systems, including PLCs, operator interfaces, AC drives, motors, stepper systems, sensors, motor controls, enclosures and more.
Feb 4th, 2020
2010np Abb
Robot and Controller for Harsh Environments
ABB’s IRB 1100 robot, powered by the new OmniCore C90XT controller, is IP67-rated.
Feb 3rd, 2020
Ira Sharp, Director of Product Marketing—Automation, Phoenix Contact USA
A New Generation of PLCs for a New Generation of Engineers
The Industrial Internet of Things demands more data than ever before from systems and processes that have traditionally not been connected to business systems. The end goal is to provide continuity between different systems and make better use of machines
Nov 1st, 2019
1912np Nidec
Variable Frequency Drives Have Low-Environmental Impact
The VFD AFE transformerless medium-voltage drives of the SVFH series from Nidec ASI claim extremely high efficiency and can be connected quickly and directly to the grid.
Jan 2nd, 2020
1912np Abaco
Four-Channel SFP Gigabit Ethernet Interface
The XMC477RC XMC from Abaco supports four SFP (Small Form Factor Pluggable) modules for maximum flexibility, providing a choice between 1000BASE-X optical or 1000BASE-T copper connectivity.
Jan 2nd, 2020
Net Pi Mix
Top Articles of 2019: Open Source Computing
Coverage of Hilscher’s industrialized Raspberry Pi platform is one of Automation World’s top 5 articles of the year.
Dec 26th, 2019
Siemens demonstrated “flexible grasping” using AI and neural network processing.
Top Articles of 2019: Artificial Intelligence
Coverage of Siemens addition of artificial intelligence via neural networks to traditional control programs is one of Automation World’s top 5 articles of the year.
Dec 24th, 2019
Getty Images 1146877220 (1)
Connecting PLCs for High-Speed Packaging Quality
Stone Technologies creates an effective automated defect rejection process requiring deterministic communication between controllers on separate parts of a high-speed packaging line.
Dec 20th, 2019
Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.
Emerson and the Integration of Process and Discrete Automation
Emerson executives Peter Zornio and Stuart Harris provide insights into Emerson’s future following its acquisitions last year of Aventics and GE Intelligent Platforms.
Oct 17th, 2019
Are Servo Motor and Drive Combinations from One Vendor Better?
Are Servo Motor and Drive Combinations from One Vendor Better?
In this episode of the 'Automation World Gets Your Questions Answered' podcast series, we connect with Eric Roggeman and Greg Dieck of Omron Industrial Automation to find out if servo motor/drive/controller combinations sourced from one vendor are the best option or if mixing and matching components is preferred.
Oct 15th, 2019
More in Control
Motion Failure Alarm Facilitates Commissioning and Configuration
Motion Failure Alarm Facilitates Commissioning and Configuration
The Sitrans WM300 (MFA) motion failure alarm from Siemens detects changes in the motion and speed of rotating, reciprocating, or conveying equipment.
Oct 3rd, 2019
Virtual Sensor Reads Safe Speed
Virtual Sensor Reads Safe Speed
The Safe Speed Observer from B&R determines speed of the company’s Acopos P3 servo drive in accordance with SIL 2 / PL d / CAT 3 requirements.
Oct 3rd, 2019
Remote HMI Without Attached Display
Remote HMI Without Attached Display
The EA9-RHM headless C-more Remote Human-Machine Interface from AutomationDirect provides all the functionality of an EA9 touch panel without the extra cost of a touchscreen interface.
Oct 3rd, 2019
Pigler Automation Tests Siemens' Next-Gen DCS
Pigler Automation Tests Siemens' Next-Gen DCS
While the Simatic PCS neo was in development, the company enlisted the help of its integration partner to be a pilot user of the new control software.
Oct 1st, 2019
Evergreen UV's EDU with Lascar Electronics' PanelPilotAce HMI as the device interface.
HMIs Play Role in Portable Disinfection
Evergreen UV expands the functionality and accuracy of its air and surface disinfection devices with the incorporation of HMIs from Lascar Electronics.
Oct 1st, 2019
Aw 403831 Thumbnail 2 9041d025 V2
Schneider Electric Unveils IIoT-Ready PLCs, AR, and Motion
Demos of IIoT box as server for hands-free augmented reality and next-generation of motor controls.
Sep 26th, 2019
SMC
Wireless IO-Link Master For Remote Motion Control
SMC’s next-gen wireless base module gets reduced in size and adds flexible connectivity capabilities.
Sep 25th, 2019
Peter J. Photos of Streamline Innovations in front of a live HMI view from one the company's processing plants.
Today’s Digital Transformation Reality
Dana Inc. and Streamline Innovations show how digital transformations can start today in the discrete and process industries using Ignition to overcome legacy infrastructure’s digital shortcomings.
Sep 20th, 2019
Making the Plant a Safe Place
Making the Plant a Safe Place
Manufacturers and OEMs must understand that there are many sides to machine safety, including standards, regulations, functional requirements, technology, and even unforeseen circumstances.
Sep 15th, 2019
Beckhoff’s XTS (eXtended Transport System) linear transport system.
Improving Material Handling Capabilities
Increased collaboration among mechanical, electrical, and software engineers at machine builders has led to a number of advances in material handling automation technology, like Beckhoff’s XTS linear transport system.
Sep 10th, 2019
Brian DeFanti, project engineer, Avanceon
Are you Protecting your Most Valuable Assets?
Safety in manufacturing is nothing new. And though an investment in safety can do so much for a manufacturing plant, it’s something that can easily be ignored or pushed to the side.
Sep 9th, 2019
Nonroutine work is any action that is out of the norm where the chance of error is increased. Image courtesy of OpX Leadership Network
Understanding Safety in Nonroutine Work
When a safety program is well-executed and well-maintained, it becomes part of a company’s core values and culture. Employee well-being is paramount, and no production schedule is worth a safety mishap.
Sep 3rd, 2019