Exor's eTOP507MFB is designed for the food and beverage industry with a stainless steel bezel.
The HMI does not need to be shielded from high temperature, high pressure cleaning; the IP69K PCAP Touch "Glove Compatible" HMI has a 316 SS bezel and polyester front foil resistant to high pressure, high temperature, harsh chemical wash-down. There is no need to cover the HMI panel during equipment cleaning; no need for manual, less effective secondary cleaning procedures! And most certainly, no more HMI failures! Reduced labor; and reduced risk of product contamination from manual/secondary cleaning procedures. Features include a stainless steel bezel 316/1.440l with an IP69K rating, food-compatible gasket and food standard sealing compliant with FDA 21 CFR 177.2006. The unit's 7-inch TFT display 800x480 64K colors features a PCAP touchscreen that can be operated with gloves in food areas. The HMNI features a high-performance 1 GHz ARM CPU with 256 MB Flash, two host interface v.2.0, SD card slot, two Ethernet ports with integrated switch and an extended temperature range of 20 +60 °C).
>>For more information on this product, click here
Electromate
905.850.7447
www.electromate.com
Optimize food production with SEW-EURODRIVE’s hygienic, energy-efficient automation and drive solutions for precision, reliability, and sustainability.
George Reed, with the help of Factory Technologies, was looking to further automate the processes at its quarries and make Ignition an organization-wide standard.
