Registration Open for Webcast Series

ICONICS has just released a new Webcast Series. Topics include Software for Building Automation, Renewable Energy, and Water and Wastewater, HMI Web Solutions, High Speed Historians, Real-time Energy and Facility AnalytiX™, Manufacturing Productvity, and HMI for Windows Phone 7. Each Webcast will run 45-60 minutes.

This content was submitted directly to this website by the supplier.

For more information, and to register Click Here

The new Webcast series schedule is as follows:

Open Software Standards for Building Automation

Date: Tuesday, March 22, 2011 at 10:00 AM (GMT-5)
Whether you maintain a small or large building complex or an entire campus, the challenge is the same: managing multiple systems all of which communicate on different protocols from one centralized location. In this presentation learn how ICONICS provides an easy way to navigate and control key operating parameters in multiple facilities within a centralized, common Web-enabled user interface using our new FacilityWorX™ product.


Renewable Energy Solutions 
 

Date: Wednesday, March 30, 2011 at 10:00 AM (GMT-5)
With increasing legislation and demand for energy, renewable energy solutions are becoming more commonplace across the globe. ICONICS understands the growing needs of renewable energy suppliers and has developed EarthWorX™, part of ICONICS GENESIS64™ HMI/SCADA suite, a geographical information SCADA technology which provides real-time visualization to widely dispersed assets such as wind and solar farms, fuel cell power plants, as well as many others. ICONICS' unique SmartPin technology allows for an intuitive drill-down capability to quickly view alarm conditions and status for any location around the world. Within seconds, assets performance, issues, or alarm conditions can be identified and located through GENESIS64's integration with Microsoft's Bing Maps in real-time. 

The Latest in HMI Web Solutions 

Date: Wednesday, April 6, 2011 at 10:00 AM (GMT-5)
From one development platform be able to publish rich, and robust graphics to any platform and browser. This webcast will show how existing plants can increase productivity, reduce the demand on IT resources while not compromising security. Our team of presenters will demo the latest in 64 Bit Web based HMI and .NET portals that can be tailored to your application. 
or click on the webcast title of interest below.

64-Bit High Speed Historian for Plant Optimization

Date: Wednesday, April 13, 2011 at 10:00 AM (GMT-5)
Optimize plant operations with ICONICS' Hyper Historian™, a 64-Bit, high-speed, reliable and robust enterprise-wide real-time data historian designed from the ground up to collect and log data in excess of 150,000 tags per second from a large number of data sources, including OPC-UA, OPC DA, SNMP, databases, BACnet and many more. Learn how Hyper Historian's Web-enabled Workbench framework can be used to provide both a configuration and real-time visualization environment for charting, reporting, analysis and historical data trend replay. The Workbench also includes productivity tools for source control, project management and application deployment.


Get a Real-Time View of Your Energy Cost & Consumption with Facility AnalytiX

Date: Wednesday, April 20, 2011 at 10:00 AM (GMT-5)
The new Energy AnalytiX™ solution by ICONICS provides an easy-to-deploy calculation, aggregation, analysis and visualization tool set that provides the information facility managers need to take decisive action, to reduce and manage utility costs, as well as minimize carbon footprints. In this Webcast you will learn how to gain insight into energy consumption patterns and see how to access information from the control room, office, home or phone.


HMI SCADA for Water and Wastewater

Date: Wednesday, April 27, 2011 at 10:00 AM (GMT-5)
Water and wastewater processing organizations require powerful tools to minimize downtime, reduce costs of operation, minimize applications development and bridge the gap between IT, MIS and water facilities. The GENESIS64 HMI/SCADA solution from ICONICS provides these tools as well as superior monitoring, control and reporting on the overall operation from a single location while connecting satellite and remote sites with secure and reliable networking technologies (LAN, WAN, and the Internet) and recording operator actions, system events and alarms.


GEO SCADA 2D & 3D Visualization 

Date: Wednesday, May 4, 2011 at 10:00 AM (GMT-5)
GENESIS64 represents a quantum leap in HMI/SCADA technology with stunning 2D and 3D hardware-accelerated visualization. Learn how GraphWorX64™ with its time saving engineering capabilities reduces implementation costs, while providing the optimal intuitive user experience. This webcast will demonstrate how to import 3D CAD files and other engineering content, so that it is instantly available for a richer and more efficient user experience. Lean how ICONICS products take advantage of such as, Microsoft WPF, Silverlight, XAML and Multi-touch technologies.


Achieve Operational Efficiency with Manufacturing Productivity

Date: Wednesday, May 11, 2011 at 10:00 AM (GMT-5)
Track real-time key performance indicators (KPIs) such as OEE, first pass yield, availability, uptime, cycle time and many more. This session will highlight customer and partner case studies to illustrate the flexibility of ICONICS solutions for operations engaged in "Lean" initiatives for continuous improvement of throughput, quality and asset utilization.


Fault Detection and Diagnostics with Facility AnalytiX

Date: Wednesday, May 18, 2011 at 10:00 AM (GMT-5)
This webcast will introduce the new Facility AnalytiX Solution. Facility AnalytiX is an equipment and system condition monitoring solution that uses an advanced Fault Detection and Diagnostics Engine incorporating algorithms that weigh the probability of a fault and advise plant management, building operators and maintenance personnel of actions to prevent equipment failure or excessive use of energy. When equipment failures occur, advanced software technology provides automatic guidance to a list of causes sorted by probability, resulting in reduced downtime and costs to diagnose and repair.


Staying Connected with HMI for Windows Phone 7
 

Date: Wednesday, May 25, 2011 at 10:00 AM (GMT-5)
Manufacturers and Processers have a need for mobility solutions to stay connected and increase productivity. With ICONICS' MobileHMI™ on Windows Phone 7, staying in touch with your building and manufacturing operations has never been easier. The MobileHMI application delivers real-time alerts, trends, and events to over 400 wireless devices, including Windows Phone 7.


Get a Real-time View of Your Energy Cost & Consumption with Energy AnalytiX
 

Date: Wednesday, June 8, 2011 at 10:00 AM (GMT-5)
The new Energy AnalytiX solution by ICONICS provides an easy-to-deploy calculation, aggregation, analysis and visualization tool set that provides the information facility managers need to take decisive action, to reduce and manage utility costs, as well as minimize carbon footprints. In this Webcast you will learn how to gain insight into energy consumption patterns and see how to access information from the control room, office, home or phone.


Renewable Energy Solutions 
 

Date: Wednesday, June 15, 2011 at 10:00 AM (GMT-5)
With increasing legislation and demand for energy, renewable energy solutions are becoming more commonplace across the globe. ICONICS understands the growing needs of renewable energy suppliers and has developed EarthWorX™, part of ICONICS GENESIS64 HMI/SCADA suite, a geographical information SCADA technology which provides real-time visualization to widely dispersed assets such as wind and solar farms, fuel cell power plants, as well as many others. ICONICS' unique SmartPin technology allows for an intuitive drill-down capability to quickly view alarm conditions and status for any location around the world. Within seconds, assets performance, issues, or alarm conditions can be identified and located through GENESIS64's integration with Microsoft's Bing Maps in real-time.


Achieve Operational Efficiency with Manufacturing Productivity

Date: Wednesday, July 13, 2011 at 10:00 AM (GMT-5)
Track real-time key performance indicators (KPIs) such as OEE, first pass yield, availability, uptime, cycle time and many more. This session will highlight customer and partner case studies to illustrate the flexibility of ICONICS solutions for operations engaged in "Lean" initiatives for continuous improvement of throughput, quality and asset utilization.


Get a Real-time View of Your Energy Cost & Consumption with Energy AnalytiX 
 

Date: Wednesday, July 20, 2011 at 10:00 AM (GMT-5)
The new Energy AnalytiX solution by ICONICS provides an easy-to-deploy calculation, aggregation, analysis and visualization tool set that provides the information facility managers need to take decisive action, to reduce and manage utility costs, as well as minimize carbon footprints. In this Webcast you will learn how to gain insight into energy consumption patterns and see how to access information from the control room, office, home or phone.


Fault Detection and Diagnostics with Facility AnalytiX

Date: Wednesday, August 17, 2011 at 10:00 AM (GMT-5)
This webcast will introduce the new Facility AnalytiX Solution. Facility AnalytiX is an equipment and system condition monitoring solution that uses an advanced Fault Detection and Diagnostics Engine incorporating algorithms that weigh the probability of a fault and advise plant management, building operators and maintenance personnel of actions to prevent equipment failure or excessive use of energy. When equipment failures occur, advanced software technology provides automatic guidance to a list of causes sorted by probability, resulting in reduced downtime and costs to diagnose and repair.

Connnection information will be made available upon valid registration. For more information, and to register, please visit: http://www.iconics.com/Home/Company/Events/Webcast-Registration.
Register Today!

ICONICS - www.iconics.com/vision360
  



More in Control