On-Site Functionality from Remote Capabilities

Remote HMI works with the screen development software GP-Pro EX v3.1 (or later) and allows users to easily monitor and control HMI screens from a smart phone or tablet without the need for special programs.

Jun 21st, 2013
Aw 16885 1306np Pro Face

It allows users to monitor and operate multiple machines using a single tablet, allowing users to check causes of errors and prepare tools for maintenance before dashing off to the source of the issue. This reduces work time by letting users see machine information no matter where they are in the factory. It makes it possible to monitor the status of multiple machines from a single mobile device, provides the ability to both monitor and control machines, and gives users the freedom to use any tablet or smart phone running Android or iOS. The system makes it possible to switch communication modes to monitor status. Synchronous mode allows monitoring screens that are the same as the operators' screens, while asynchronous mode allows monitoring different screens during regular operation without stopping on-site operation.

>>For more information on this product, click here

Pro-face America
www.profaceamerica.com
734.477.0600

The Machine Economy is Upon Us
The Machine Economy is Upon Us
The IOTA Foundation has been working on an IoT communication protocol that will enable machines to autonomously conduct transactions in a fee-free, secure, and trustworthy exchange.
Oct 18th, 2019
Motion Failure Alarm Facilitates Commissioning and Configuration
DIN Wireless Gateway Supports Network Connectivity of Wireless and Wired Sensors
SignalFire’s DIN Gateway V2 is a 900 MHz wireless gateway with an integrated I/O capability for easy network connectivity of wireless and wired sensors, integrated Ethernet and built-in automation.
Oct 3rd, 2019
Virtual Appliance Provides Entry Point for Small Deployments
Virtual Appliance Provides Entry Point for Small Deployments
The VersaVirtual appliance from Rockwell Automation provides all the computing, networking and storage capabilities needed to deploy and maintain up to 15 virtual machines in one ready-to-use appliance.
Oct 3rd, 2019
IO-Link Master Block Insulates Against Noise, Protects in Harsh Environments
IO-Link Master Block Insulates Against Noise, Protects in Harsh Environments
Balluff's new EtherNet/IP IO-Link master block insulates against inductive, conductive, and capacitive noise produced by electromagnetic interference (EMI), and its robust housing protects against harsh welding environments.
Oct 3rd, 2019
Industrial Ethernet Switches Reflect Ongoing Evolution at the Industrial IoT “Thin Edge”
In the future, 5G networks may lead the pack when it comes to connectivity, but the technology is still not completely there. Industrial Ethernet continues to be the leading technology for both industrial and infrastructure applications due to the many advantages it still holds.
Sep 30th, 2019
Machines that sense the world around them
Sponsored
Machines that sense the world around them
ADI gives cobots the ability to sense, adapt and interpret its surroundings. Our motion detection and machine learning expertise is transforming factory floors. From invention to breakthrough with ADI.
Nov 6th, 2019
Peter J. Photos of Streamline Innovations in front of a live HMI view from one the company's processing plants.
Today’s Digital Transformation Reality
Dana Inc. and Streamline Innovations show how digital transformations can start today in the discrete and process industries using Ignition to overcome legacy infrastructure’s digital shortcomings.
Sep 20th, 2019
The frequency of network upgrades across industries tends to vary due to the nature of the work in a particular vertical and the amount of capex involved.
Best Practices for Your Network Upgrade
Industrial networking technologies and the cyber attacks they face have evolved dramatically over the past several years. As a result, greater attention to network upgrade best practices is becoming increasingly critical to all industry verticals—not just critical infrastructure.
Sep 3rd, 2019
The SmartNA-XL from Network Critical combines critical TAP and packet broker capabilities with modularity, enabling organizations to better manage and secure the flow of network data.
Ultra-Flexible Hybrid TAP System for End-to-End Network Access and Visibility
The SmartNA-XL from Network Critical combines critical TAP and packet broker capabilities with modularity, enabling organizations to better manage and secure the flow of network data.
Sep 3rd, 2019
HARTING’s Han ES Press HMC enables flexible production and simplified installation up to ten thousand mating cycles.
Connector Inserts for Frequent Mating/Unmating
HARTING’s Han ES Press HMC enables flexible production and simplified installation up to ten thousand mating cycles.
Sep 1st, 2019
The LMP-1802G-SFP and LMX-1802G-SFP Series from Antaira are aimed at edge-level networking applications in harsh and outdoor environments.
18-Port Gigabit Ethernet Managed PoE+ and Non-PoE Switches
The LMP-1802G-SFP and LMX-1802G-SFP Series from Antaira are aimed at edge-level networking applications in harsh and outdoor environments.
Sep 1st, 2019
Discover the Secrets of a Successful Automation Project
Sponsored
Discover the Secrets of a Successful Automation Project
Learn about planning and project management, building your machine or automated system, and technologies to improve manufacturing outcomes. Automation World’s free resource features 150 pages on managing automation projects from start to finish.
Nov 6th, 2019
Assembly of a base station at Nokia's facility in Oulu, Finland. Source: Nokia
Nokia Employs 5G In Its Own Factory
To prove the capabilities of its private wireless 4.9G & 5G networks, edge/cloud, and analytics technologies, Nokia put them into play in its Oulu, Finland, base station pre-production facility.
Aug 12th, 2019
A new line of M12 field termination connectors and in-line adapters from L-com address harsh environment connectivity applications.
M12 Field termination Connectors and In-Line Adapters
A new line of M12 field termination connectors and in-line adapters from L-com address harsh environment connectivity applications.
Aug 8th, 2019
High-performance 43 x 1.5 mm2, - a 3-layer VDE certified power and control cable from HRADIL, is designed for 1.2 million alternating bending cycles.
Drag-Chain Cable for Extreme Tasks
High-performance 43 x 1.5 mm2, - a 3-layer VDE certified power and control cable from HRADIL, is designed for 1.2 million alternating bending cycles.
Aug 8th, 2019
Antaira Technologies’ LMP-1600G and LMX-1600G series are for edge-level networking applications in harsh and outdoor environments.
High Port Count Gigabit Managed Non-PoE & PoE+ Switches
Antaira Technologies’ LMP-1600G and LMX-1600G series are for edge-level networking applications in harsh and outdoor environments.
Aug 8th, 2019
Not So Fast: TSN Not Quite Ready for Prime Time
Though standardization efforts for Time-Sensitive Networking continue at pace, it is still years before industry should expect to see a bumper crop of compatible products.
Jul 26th, 2019
OPC UA Over TSN
FAQ on OPC UA Over TSN
John Kowal, director of business development at B&R Industrial Automation, provided this FAQ on OPC UA over TSN. B&R is a 'committed contributor' to the 'OPC UA including TSN down to the field level' initiative.
Jul 26th, 2019
ASi Hierarchy Model
ASi Updates for Industry’s Digital Age
A new version of the AS-Interface, ASi-5, has been released to provide a backward-compatible means of connecting field-level I/O devices to control systems and the cloud.
Jul 15th, 2019
This sample image shows some of the capabilities of the turner/diverter/rejector table used by Stone Technologies in this application. Source: Stone Technologies
Connecting PLCs for High-Speed Packaging Quality
Stone Technologies creates an effective automated defect rejection process requiring deterministic communication between controllers on separate parts of a high-speed packaging line.
Jul 3rd, 2019
More in Networks
Industrial worker uses tablet to access data wirelessly.
Wireless Networks and Industrial Mobility
The “Automation World Gets Your Questions Answered” podcast gets insights on industrial wireless technology from Justin Shade at Phoenix Contact to better understand the technology's real world application potential, as well as its security, speed, and connectivity issues.
Jul 2nd, 2019
Advantech Teams with Nvidia on Industrial Artificial Intelligence
Advantech Teams With Nvidia on Industrial Artificial Intelligence
With their sights set on widening the use of artificial intelligence in industry, Advantech and Nvidia are working together around the use of Nvidia’s Jetson technology in cloud and edge computing products.
Jun 28th, 2019
Creating a Continuous Improvement Culture
Creating a Continuous Improvement Culture
The Rever app applies lean management principles to the way we work, turning operators on the plant floor into knowledge workers who can capture process improvement ideas, experiment with solutions, and share the results.
Jun 25th, 2019
The Tosibox Lock 500 is a high-end connectivity device used to manage operations and build new IoT systems.
Automating Industrial Networking
Tosibox highlights its patented, automated method of connecting devices as a way of simplifying industrial networking for secure remote access to devices and machines.
Jun 25th, 2019
Configuring Wireless Networks for Mobile Use
In the third episode of the “Automation World Gets Your Questions Answered” podcast series, we connect with Justin Shade of Phoenix Contact explore industrial wireless technologies and their OT/IT collaboration requirements, speed capabilities, and security concerns.
Jun 21st, 2019
Moxa's NPort serial device server and MGate Ethernet gateway
Connecting Serial Devices to the Cloud
Moxa helps facilitate Industrial Internet of Things initiatives with serial device servers and protocol gateways to connect legacy devices to the cloud.
Jun 18th, 2019
Small Form Factor Industrial IoT Gateway
Small Form Factor Industrial IoT Gateway
The fanless PL-80580 From WIN Enterprises is for use as an Industrial IoT (IIoT) gateway, and for networking applications requiring a small footprint and industrial temperature tolerance.
Jun 11th, 2019
Modular Cable Entry System Updated
Modular Cable Entry System Updated
The new Cabtite Cable Entry System from Weidmuller is for pre-assembled cables and cables without plugs.
Jun 11th, 2019
Plastic Connectors Mate with Metal
Plastic Connectors Mate with Metal
Harting’s Han-Eco B offers compatibility with metal connectors and can be rear-mounted, saving time and money as well as optimizing the assembly process.
Jun 10th, 2019
IO-Link Masters Increase Flexibility
IO-Link Masters Increase Flexibility
The newest family of IO-Link masters from Balluff provide more flexibility in designing controls architectures with Smart IO-Link devices.
Jun 10th, 2019
Industrial 802.11a/b/g/n/ac Wi-Fi Access Point/Client/Bridge/Repeater
Industrial 802.11a/b/g/n/ac Wi-Fi Access Point/Client/Bridge/Repeater with Router Capabilities
The ARS-7131-AC Series from Antaira supports high-speed data transmission of up to 867 Mbps.
Jun 10th, 2019
Roughneck uses PLC analog cards and Profinet to provide operational data from its delivery systems to data vans at the well sites.
Reliable Remote Monitoring Keeps Well Sites Productive
Roughneck Equipment, which provides chemical delivery equipment to oil and gas fracturing operations, uses Profinet to make it easier to keep utilization rates high.
Jun 8th, 2019