NANO Servo Drives Extending the Barriers of Power Density

Elmo Motion Control, a leading provider of advanced and cost-effective motion control solutions, will exhibit a demonstration revealing strength, intelligence and accuracy of motion controllers and servo drives at SLAS 2015 in Washington, D.C.

This content was submitted directly to this website by the supplier.

Jan 26th, 2015

Elmo Motion Control, a leading provider of advanced and cost-effective motion control solutions, will exhibit a demonstration revealing strength, intelligence and accuracy of motion controllers and servo drives at SLAS 2015 in Washington, D.C.

We invite you to check out Elmo’s powerful demonstration of the revolutionary NANOGold Twitter, the tiny smart servo drive operating a 4000 watt motor. Weighing just 18 grams and less than 13 cm3 in volume, the Gold Twitter delivers qualitative power using up to 50A and up to 200V with advanced servo capabilities and support for EtherCAT or CANopen networking communication.

Elmo’s advanced series of Gold Line servo drives will also be exhibited at SLAS. These servo drives are designed to provide the highest density of power up to 65 kW of outstanding performance, intelligent motion functions (Output Compare, Master-Slave Follower, Modulo, Dynamic Braking, ECAM,PIP Cascaded Vector Control, i2t Protection); the ability to handle all feedback; STO safety standard compliance; and UL and IEC 61800 certification to 800 VDC and 530 VAC.

Easily set up and tuned using Elmo Application Studio II (EASII) software, the Gold servo drives operate as a single or multi-axis control solution in a distributed configuration real-time network.

Elmo’s robust motion control products will be on view at SLAS 2015, in Washington, D.C., taking place February 7-11, 2015 in Booth #1313.

 

>> For more information on this product, click here

 

Companies in this article
Elmo Motion Control
Emerson Vr2
Technology Matters: Remote Access, Virtual Workforce Training, and Functional Machine Safety
A review of automation technology developments recently covered by Automation World to help you stay on top of what’s happening in the world of industrial automation.
May 29th, 2020
The wearable Kinexon SafeTag warns the user, audibly and visually, when the physical distance with another employee has been compromised.
Technology Steps Forward for Social Distancing
As more manufacturers are allowed to resume production amid the COVID-19 pandemic, keeping their workers distanced will be key to keeping them healthy. Here are some innovations to help achieve that.
May 28th, 2020
Number of fixed line versus wireless connections, world markets, forecast: 2016 to 2030. Source: ABI Research/Nokia
Where 5G and Industry 4.0 Meet Amid COVID-19
A survey conducted by Nokia and ABI Research highlights moves toward private cellular networks in manufacturing. The question now is: Will COVID-19 accelerate or decelerate this trend?
May 27th, 2020
Nicholas Imfeld, principal engineer, Avanceon
The (Virtual) Grand Tour: Getting Creative with Restrictions
COVID-19 has forced many companies to shift strategies, causing many organizations to get a little creative. In terms of plant tours and inspections, going virtual may be the first step in working through the restrictions.
May 25th, 2020
The A2K Absolute Optical Encoder from US Digital can be assembled onto existing shaft and bearing assemblies. The encoder reports the shaft angle within a single 360° rotation of a shaft.
Encoder Selection Tips
To control motion on a machine or electromechanical system you need continuous positional feedback from the moving parts. That’s where encoders enter the picture. But how do you determine which one is best for the job?
May 26th, 2020
Tufftalk M Cnc Shop Alyssa
Technology Built for the Open Road Hits the Plant Floor
General Mills turns to Sena Technologies—known for its Bluetooth motorcycle helmets—to train machine operators while social distancing.
May 22nd, 2020
Awtm Logo
Technology Matters: Open Source SCADA, HMI Upgrades, and Wearable Sensors
A review of automation technology developments we’ve recently covered to help you stay on top of what’s happening in the world of industrial automation.
May 21st, 2020
Ron Stuver, director, business consulting and Industry 4.0, Sick
Maximizing Productivity with the Power of Data
Bringing your manufacturing processes into the fourth industrial revolution.
May 21st, 2020
David Kelley, lead automation engineer, Panacea Technologies
Ensuring a Successful Automation Migration Project
Migrating or upgrading a system can be long and often difficult process, which oftentimes leaves organizations second-guessing the project as a whole. However, there are possible steps to take to make sure everything is easier and successful
May 21st, 2020
A loading rack for tanker truck transfers
Cutting the Cost of Compliance with Connected Systems
A look at how Blendtech bridges information technology and operation technology systems to improve safety and accounting as well as compliance with regulations.
May 21st, 2020
Production part created with the Stratasys F450 using Antero PEKK-based material to create parts with high strength and superior dimensional stability. Source: Stratasys.
The 3D Printing-ERP Connection
As the use of 3D-printed parts for production grows, including this new production capability in ERP scheduling using demand-driven materials requirements planning is critical to avoiding production capacity issues.
May 20th, 2020
Kevin Tardif, business development specialist, Festo
Robots: How to Choose the Right One
Available in a range of performance capabilities and prices, robots are becoming ubiquitous in all types of industrial production operations. Understanding the capabilities of each robot type is key to making the best choice for your business.
May 19th, 2020
Getty Images 1176054661 (1)
Cloud Cost Factors: 7 Considerations
Manufacturers looking to move data to the cloud face unique challenges due to the nature of industrial business and existing capital investments. Here’s advice on how to assess those challenges from a cost vantage point.
May 19th, 2020
Screen Shot 2020 04 10 At 11 48 15 Am
Six Business Imperatives Driving a Connected Manufacturing Strategy
As industrial facilities become increasingly becoming connected, these businesses are also creating new connections to innovate how they leverage data for productivity gains, savings, and revenue growth.
May 19th, 2020
Image-based scanners are displacing standard laser scanners, providing the capability to read 2D barcodes, which can be much smaller than traditional barcodes. Photo courtesy of Cognex.
New Technologies Feed the Hunger for Information
Trying to keep up with productivity, quality, safety, sustainability, and other industry demands, food and beverage plants are turning increasingly to the innovations found in today’s sensor instrumentation.
May 19th, 2020
Getty Images 124460253
Economic Outlook: 2020 and Beyond
Discussing the current economic outlook amidst a “double black swan event,” Alex Chausovsky of ITR Economics presented “Guidance in an Uncertain Economy” last week as part of PMMI’s Executive Leadership Conference.
May 18th, 2020
Larry White, executive director, Resource Consumption Accounting Institute
Budgeting for Manufacturing
One of the most important parts of manufacturing is budgeting, and ensuring that both manufacturing and finance are on the same page and have all the necessary information is how to come up with an accurate budget.
May 17th, 2020
Andrew Hughes, principal analyst, LNS Research
COVID-19—Let’s Look Beyond Today
Though it may seem like a good idea to hold back on transformation projects during the COVID-19 pandemic, Andrew Hughes shows how that may come at the risk of falling behind those who are continuing down this track.
May 16th, 2020
2005 F3 1
MadTree Brewing Gets a One-Stop Supervisory Management System
Though outdated, many organizations continue to use spreadsheets and whiteboards to keep track of and consolidate data. MadTree Brewing Company was among those companies until they implemented the Ignition platform from Inductive Automation.
May 15th, 2020
Awgyq Aweb
How Can Vision Systems Be Used to Inspect Solids and Liquids?
In this episode, we explore vision system selection factors, how to justify vision system investments, the types of industrial applications they're most suited for, and how the technology can be used to inspect liquids and solids on the production line.
May 15th, 2020
More in Home
Awtm Logo
Technology Matters: Maintenance and the Digital Transformation, Virtual Assistants, IoT Adoption and COVID-19
A review of key developments we’ve recently covered to help you stay on top of what’s happening in the world of industrial automation.
May 14th, 2020
Data
What Pub/Sub Means for Industrial Networks
The publish/subscribe communication paradigm promises an era of real-time data exchange and increased flexibility to support next-generation IIoT applications and flexible manufacturing.
May 14th, 2020
F1 1
CPGs Retool to Get Into the Loop
As manufacturers ramp up sustainability efforts, they are looking at innovative ideas—like TerraCycle Loop, a closed-loop system of reusable containers. But such efforts mean investing in new product designs and packaging lines.
May 13th, 2020
Sven Hamann, SVP Bosch Connected Industry; Ralf Waltram, vice president IT Systems Production and Logistics, BMW Group; Dr.-Ing. Michael Bolle, member of the board of management, Bosch Group; Scott Guthrie, EVP Cloud & AI, Microsoft; Werner Balandat, head of production management, ZF Friedrichshafen AG
Open Manufacturing Platform Expands
Three steering committee members and new working groups have been added to the The Open Manufacturing Platform to help guide manufacturers through digital transformation.
May 13th, 2020
The highly compact XTS has a circumferential track length of 22 m and uses a total of 40 independent movers. The L’Oréal Group produces high-quality skin care products, mascaras, and foundation makeup for its Division Luxe.
L’Oréal Replaces 5 Machines with One Smart System
Facing SKU proliferation and shorter runs, the L’Oreal Group replaced an outdated system with a new track-based system of movers that brings fast changeover and high output.
May 12th, 2020
The Purdue Model of Computer Integrated Manufacturing
Is the Purdue Model Still Relevant?
The Purdue Model has provided a hierarchical structure for industrial communications to keep computing and networks deterministic. But in the age of IoT, data flow is no longer hierarchical. So what model should industry use now?
May 12th, 2020
Micropilot Fwr30 Level Radar Press Release Image
Cloud-Connected Radar Level Sensor
Endress+Hauser has released the Micropilot FWR30, its first cloud-connected radar level sensor which it claims is the world’s first 80 GHz wireless sensor.
May 11th, 2020
Luigi De Bernardini, CEO at Autoware, and President of Autoware Digital.
Thoughts on System Integrators Before and After COVID-19
As the world continues to change during the COVID-19 pandemic, the questions of how businesses will operate after COVID-19 are cropping up. Luigi De Bernardini shows how his organization is adjusting to the pandemic and preparing for what comes after.
May 11th, 2020
Gv Qoe5rd 1280 5eb4136a50088
Technology Matters: Cybersecurity, Safety, IoT Sensors, Artificial Intelligence
A review of some of the more interesting topics we’ve recently covered to help you stay on top of what’s happening in the world of industrial automation.
May 7th, 2020
Ipad Robot
Mobile Device Safety and Security
Insights into addressing manufacturing and processing plant security and safety issues amid the growing use of mobile devices in industrial facilities.
May 5th, 2020
Anheuser Busch
Anheuser-Busch InBev Installs Remote Guidance Platform
The global brewer will save cost-consuming trips and support sustainable service, while reducing time for equipment repairs and overall downtime.
May 3rd, 2020
H Po N1 Ma O 1920 5ea9819fd0c1e
High-Efficiency IE5 Motor and VFD
Nord Gear showcases its newest high-efficiency motor and variable frequency drive combination to deliver operating cost savings regardless of the motor's speed and load.
Apr 29th, 2020