The EL900 Hardened Fast Ethernet Media Converter is a two-port Ethernet switch with one 10/100/TX port and one 100FX port, converting copper to fiber optics.
The fiber optic port may be configured for multi-mode or single mode duplex fiber, or single mode WDM with a single fiber cable. The EL900 operates in ambient temperatures of -34ºC to +74ºC and may be mounted on a shelf, wall or DIN rail. The EL900 includes the following features: meets NEMA TS1/TS2 environmental requirements for traffic control equipment; meets IEC 61000-6-2 EMC generic standard immunity for industrial environments; 2K MAC addresses; DIP switch configuration for “link-fault-pass-through,” link down alarm, speed and duplex mode; non-blocking full wire-speed forwarding rate; store-and-forward mechanism; broadcast storm filtering; back-pressure and IEEE 802.3x compliant flow control; alarms for power and port link failure by relay output; and redundant 24VDC power inputs.
Shorten project timelines with these hidden-gem Ignition efficiency tips for designing HMIs, provided by Inductive Automation Sales Engineer Reese Tyson.
Get ready for that “where has this been all my life?” moment—over 25 hidden Ignition features await in our webinar. Our experts show how to boost your productivity and streamline...
Advanced software solutions, like those built in the Ignition platform from Inductive Automation, can provide a crucial means to navigating electrical grid challenges.
Unlock seamless data flow across your manufacturing sites with MQTT and Ignition—turn siloed operations into a connected, data-driven enterprise. Discover how standardization,...
