FM Approved Quick Disconnect Sensor-Cordset

Quick disconnect products for use in Class I, Div 2, Groups A, B, C and D when equipped with a TURCK guard.

Jan 1st, 2009

TURCK has expanded its offering of FM approved 12, 18 and 30 mm 3-wire DC barrel sensor and cordset combinations. Now, quick disconnect sensors may be used in Class I, Division 2, Groups A, B, C and D environments when equipped with a TURCK lokfast™ guard. TURCK sensors with potted-in cable for use with conduit are also FM approved for these locations.

TURCK’s lokfast guards render quick disconnections not “normally arching” by eliminating access to the coupling nut and requiring a tool for removal. The ability to use quick disconnect technology enables customers to install sensors faster and at a lower installed cost than traditional conduit methods. All TURCK sensors that carry FM approval also carry IEC IP 68 degree of protection.

More information, specs, and photos

Augmented Reality Software to Streamline Operations

A new collaboration that pairs Lenovo’s ThinkReality software platform with augmented reality headsets from RealWear could help facilitate an information pipeline between enterprise planners and frontline personnel.

RoBex Rolls Out a Creative Way to Pay for Equipment

The RoBex Flexx technology licensing program, which addresses new lease accounting requirements, brings automated systems to the factory floor for a flat monthly fee.

Getty Images 1303852731

Bringing Artificial Intelligence to Remote Access

A new collaboration between IBM and Black and Veatch will help end-users to more effectively sort through the large volumes of data gathered via remote monitoring technology.

The use of remote access technology to aggregate manufacturing intelligence for use by plant managers and corporate executives is expected to grow in the years to come.

Remote Access Grows Even as Cybersecurity Fears Surge

Economic uncertainty and the quest for efficiency are driving the adoption of remote access technology across industry, even as growing concerns surrounding cybersecurity have many industry leaders spooked about greater levels of network connectedness.

Getty Images 1093678798

The Maintenance-Finance-Safety Connection

Did you know computerized maintenance management systems can be used to mitigate financial and safety risks faced by manufacturers?

Non-Magnetic Coaxial Cable

Non-Magnetic Coaxial Cable

Superior signal transmission and increased reliability

Larry White, CMA, CFM, CPA, CGFM, Executive Director of the Resource Consumption Accounting Institute.

Optimizing Manufacturing General and Administrative Costs

Comprehensive analysis of G&A resources is needed to cut cost and maintain effective management. Aggressive budget reductions without careful evaluation can degrade this essential backbone to your company.

Levi Martins, Senior Consultant, Nukon

Safeguarding Your Critical Systems

Access to a support desk with background knowledge of your systems can be a valuable addition as your business continues to grow on their digital transformation journey.

How Tools from Video Game Development Benefit the Industrial Digital Twin

As digital twin use-cases expand, tools from the field of video game development are providing a boost to their usability and aesthetic presentation. Discover the full story on this Take Five with Automation World video.

ANCA to Launch AutoMarkX, an Automated Laser Marking System at EMO 2021

The AutoMarkX is an automatic stand-alone laser marking station.

MESA Cybersecurity Working Group Chairman

Cybersecurity Myth: We Are Disconnected

Many consider their manufacturing systems or industrial control systems “disconnected” and safe. However, there are a number of factors working against that assumption to threaten systems.

Non-Magnetic Coaxial Cable

Non-Magnetic Coaxial Cable

Superior signal transmission and increased reliability

How Can New Material Handling Technologies Support Adaptive Manufacturing Concepts?

In this episode, we connect with Jeff Johnson, U.S. mechatronics product manager at Beckhoff, to learn more about how Beckhoff's XPlanar material handling system uses levitation to move parts and products for assembly and/or packaging applications.

Procter & Gamble Partners with Robotics Startup Incubator

While the specific technologies Procter & Gamble is interested in are hush-hush, mobile robotics technologies appear to be a key point of interest.

Getty Images 733931395

Understanding Maintenance Metrics

The “mean time to repair” and “mean time before failure” metrics can be used to track asset performance as well as maintenance teams and individuals.

Getty Images 897684502

IIoT Connected Assets Guide

Industry IoT Consortium releases a guide designed to help manufacturers network connected assets and products.

Diane Sacra, Director of Marketing, LNS Research

It’s Time to Get Real with Industrial Transformation

Find out about LNS Research's findings on companies' Industry 4.0 transformation efforts, success, and progress.

Aaron Muir, Engineering Manager, Glenmount Global – an E Technologies company.

Ensuring a Safe and Effective Remote Maintenance and Support System

Discover three key considerations when approaching maintenance and support remotely: Security conscious design, stakeholder collaboration, and remote access methods.

PACK EXPO Las Vegas Automation Preview

Highlights of new automation technologies to be showcased at PACK EXPO Las Vegas from Beckhoff Automation, Festo, Nord Gear, Omron, and Universal Robots. Watch this Take Five video for the full preview.

Getty Images 154962570 2

Emerson Combines LNG Inventory Management and Tank Gauging

The Rosemount TankMaster system can predict the release of liquid natural gas vapors to reduce loss of product, safety risks, and failures to meet environmental regulations.

More in Home

Getty Images 1329825215

Industry Support Organizations Adapt to Digital Transformation

The Profibus/Profinet User Organization and the Industrial Internet Consortium announce operational changes reflective of IoT and Industry 4.0-driven changes to the industries they serve.

Depowdering32using32compressed32air

Automated De-Powdering for 3D Printed Parts

A new collaboration between Festo and Solukon aims to design a flexible handling system for automated de-powdering of 3D printed components.

Daniel C. Malyszko, Director of Operations and IIoT Consultant, Malisko Engineering.

Demystifying Analytics – An Integrator’s Perspective Roadmap

Examine the maturity levels of factory floor convergence, information gleaned, and possible steps to achieve robust data analytics for a manufacturing operation.

8:18 Z Aw Title

The State of Industry 4.0 Adoption — Take Five with Automation World Video

A report from Molex finds that the barriers holding back real-world implementation of Industry 4.0 projects have remained largely unchanged, even as attitudes have grown more positive.

Infosys General

Top Industrial Uses Case for Cloud Computing

A new report from the Infosys Knowledge Institute highlights how manufacturers are using cloud computing to advance operations and for what kinds of applications they’re using the technology most.

Using artificial intelligence, Advanced Analytics detects defect sources at an early stage during the application of paint and high-viscosity materials. Source: Dürr.

Applying Artificial Intelligence to Paint Shop Robots

Dürr expands it use of artificial intelligence to help automotive paint shops incorporate robots into existing operations for quality and plant availability applications.

Skjern Paper started production in 1967 with the idea of manufacturing paper exclusively from old newspaper.

How to Make Sense Out of Difficult Data

Skjern Paper turns to GE Digital’s Proficy CSense for real-time quality control in the production process.

Dan Riley, Analytics Manager, Interstates

The Value of Predictive Maintenance

Implementing and understanding predictive maintenance is essential if unplanned downtime has a high impact on your production schedule. Discover the step-by-step process of how to get the most value out of predictive maintenance for your plant.

8:19 Z Aw Title

FDT 3.0: A Secure, Scalable Data Exchange Standard for IIoT

The FDT Group’s platform-independent development tools enable unobstructed communication from sensors to the cloud. Watch this Take Five video to find out more.

Image Digital Twins[1]

Video Games and the Industrial Digital Twin

Think video game development only affects the consumer gaming industry? The reality is that consumer game technology can make digital twin technology easier to understand and share.

Rawling’s REV1X baseball glove

Rawlings Uses 3D Printing to Produce New Baseball Glove

Using Carbon DLS 3D printing, Fast Radius is manufacturing parts at scale for Rawlings new REV1X baseball gloves.

What is MTTR and MTBF?

In this episode, we explore Meantime to Repair (MTTR) and Meantime Before/Between Failure (MTBF) to better understand how these metrics are applied and calculated and how they can benefit manufacturers.