RocketLinx ACS7106

The Comtrol RocketLinx ACS7106 is a 6-port PoE Plus Ethernet switch purpose-built for delivering reliable power and data connections to access control and mobile surveillance applications.

This content was submitted directly to this website by the supplier.

Sep 24th, 2015

The Comtrol RocketLinx ACS7106 is a 6-port PoE Plus Ethernet switch purpose-built for delivering reliable power and data connections to access control and mobile surveillance applications. The ACS7106 switch features four 10/100BASE-TX PoE Plus ports for providing power and data to remote PDs (Powered Devices) such as access card readers and IP surveillance cameras and two 10/100/1000BASE-TX uplink ports that assure maximum throughput for high bandwidth applications.

Housed in a durable aluminum enclosure and capable of operating in a wide environmental temperature range, the ACS7106 offers features not found in typical IT-grade switches, including enhanced reliability and ruggedness, voltage boost circuitry for 12/24VDC power connections, an alarm notification relay, and compliance with the stringent UL294B safety certification required by many cities for access control equipment.

>>For more information on this product, click here.

F2 1
Network Protocols Harmonize Around Time-Sensitive Networking
As the TSN standard nears completion, excitement is growing over the prospect of bringing IT and OT closer together. Industrial protocol associations have been working hard with their support groupto adapt their protocols to this emerging standard.
Aug 14th, 2020
F3 1
Software Helps Consumer Goods Manufacturer Thrive Amid Pandemic Uncertainty
Skin Actives proves that digitizing production operations doesn’t necessarily require big ticket software technologies. Modern Material Requirements Planning software can address every step in the production process, from order processing to fulfillment.
Aug 14th, 2020
Awgyq Aweb
How Much Cybersecurity Do I Really Need?
In this episode, we connect with Brandon Bohle of Interstates Control Systems to discuss control system cybersecurity in light of increasing remote connections use in response to COVID-19, as well as general cybersecurity best practices moving forward.
Aug 14th, 2020
Noosa Yoghurt switched to a TrueClean CIP’able valve from Central States Industrial to improve cleaning efficiency.
Cleaner, Efficient Technology at the Heart of Production
Clean in place is an important trend as pump and valve suppliers look to improve uptime for food and beverage producers. Smarter, more flexible products are also helping to meet product demands.
Aug 13th, 2020
The T5 pick-and-place delta robot from Gerhard Schubert GmbH features a fifth axis that allows for high performance in small spaces.
Special Report: Robots Drive the Manufacturing Revolution
New innovations in robotics for the packaging industry enable greater flexibility, efficiency, productivity, and competitiveness for those CPGs looking to automate a range of applications.
Aug 12th, 2020
F1 1
Much Ado About Data Quality
Ensuring proper data quality for digital transformation initiatives lies in a two-pronged approach that emphasizes technology and human communication.
Aug 12th, 2020
Face shield head mounts manufactured by Stratasys using additive manufacturing. Source: Stratasys
Automating Additive Manufacturing
To optimize 3D printing of face masks in response to COVID-19, Stratasys learned how the use of cloud-based software to automate production across numerous machines enabled production and utilization rates that would have otherwise been unachievable.
Aug 12th, 2020
Pmmi Standards
Robotics Special Report: Making Sense of ANSI R15.06 and ANSI B155.1
To determine the right standards approach for your organization, it’s helpful to understand how standards are structured, which responsibilities and requirements are associated with the standards, and ISO restrictions.
Aug 11th, 2020
Avevaima Ge001
AI-Embedded Operator Interface App
The Aveva Insights Operations Management Interface app uses artificial intelligence to help improve manufacturing decision making.
Aug 11th, 2020
Brian R. May, managing director, Industrial North America, Accenture
Strengthening OEM Supply Chains for Challenging Times
Global supply chains are being impacted by COVID-19. In order to more effectively recover from the issues caused by the global pandemic and sustain success in the future, strengthening the resilience and agility of the supply chains is a must.
Aug 11th, 2020
Daniel C. Malyszko is director of operations and IIoT consultant
Balancing Employee Health and Safety With Business Continuity During a Pandemic
Maintaining operations during the coronavirus pandemic is difficult at best. The key to keeping personnel safe amid the global pandemic may lie in data acquisition initiatives and tracking and tracing technologies.
Aug 10th, 2020
Pearson’s dual-cell solution is able to handle four palletizing lines dedicated to the customer’s new case style, along with two additional lines, when needed
Robotics Special Report: Cobot-Placed Top Sheets Protect Frozen Foods
The installation of 12 robotic palletizers for frozen food products necessitates the addition of two cobot cap-sheet placers to keep the cases free from dust.
Aug 10th, 2020
ESS Technologies uses three Fanuc robots to collate more than 160 cosmetic tubes/min for feeding to a case packer.
Robotics Special Report: Vision Enables Tube Picking/Placing at 160/min
A new SCARA robotic cell developed for the collation of cosmetic tubes uses vision software and specially designed end-of-arm tooling.
Aug 7th, 2020
Image001
2020 Processing and Engineering Scholarships Awarded
PMMI awards students three scholarships totaling $15,000 for processing, mechanical and electrical engineering.
Aug 7th, 2020
Chad Geretz, business development manager at RedViking
Industry 4.0: Thriving Through Transformation
As the global pandemic continues, manufacturers should look towards Industry 4.0 technology as a way to operate at optimal performance and keep its workforce safe and healthy.
Aug 7th, 2020
ABB’s new IRB 390 FlexPacker delta robot for e-commerce applications will be launched at the end of 2020.
Robotics Special Report: E-Commerce Requires new Solutions
New robot technology addresses the specific needs of e-commerce packaging, including mixed pallet loads, labor challenges, and a variety of secondary packaging formats.
Aug 6th, 2020
Getty Images Robot Employment (1)
Workers Wanted? Contact the Robot Employment Agency
Start-up MusashiAI introduces intelligent autonomous robots for quality inspection and forklift driving—allowing the redistribution of human labor to more value-added jobs.
Aug 6th, 2020
Dick Slansky, senior analyst, ARC Advisory Group
Virtual Commissioning Evolves into a Model-driven Digital Twin
Virtual commissioning needs to go beyond emulating controls logic for emulation hardware. Model-driven digital twins make virtual commissioning more accessible and adds the power of simulation technology and capability to the overall automation process.
Aug 6th, 2020
In fall of 2019, Columbia/Okura and Universal Robots developed the miniPAL, a mobile palletizing cobot integrating Universal Robot’s UR10e.
Robotics Special Report: Cobots Continue to Advance
According to a PMMI robot report, cobots accounted for about 3% of all robot sales in North America in 2017; by 2025, that number is expected to increase to 34%. Here are some of the new cobot technologies driving that growth.
Aug 5th, 2020
Screen Shot 2020 08 03 At 4 00 15 Pm
Augmented Reality for Machine Troubleshooting
A look at how workers in Schneider Electric's Batam, Indonesia, factory use Aveva’s Augmented Operator Advisor to perform equipment troubleshooting by focusing on color-coded points of interest on each piece of equipment.
Aug 5th, 2020
More in Home
Premier Tech has developed the PSR robotic solution to speed the sorting of nuts at the final stage of the conditioning process.
Robotics Special Report: Addressing Labor Shortages can ‘Help Feed the World’
Robot manufacturer develops a system to alleviate the lack of labor in the nut industry that can sort nuts at the final stage of the conditioning process.
Aug 4th, 2020
Getty Images 1212213050
How COVID-19 is Impacting Automation Decisions
The pause in many ongoing projects as the pandemic hit gave companies more time to think about how to move forward with their automation projects. The result is an increased use of remote access and data analytics.
Aug 4th, 2020
Quest developed a flexible robotic system to load meat and poultry into an Ossid ReeForm E40 thermoformer.
Robotics Special Report: Food-Safe Solutions Emerge
New opportunities for the direct and indirect handling of foods emerge as manufacturers begin developing robots for handling unpacked goods.
Aug 3rd, 2020
Kawasaki Robotics Trend Manager failure prediction software is designed to help companies avoid unexpected downtime by allowing them to predict failures and fix issues before loss of production.
Robotics Special Report: Big Data is the New Currency
New software systems for robotics collect and analyze data to increase OEE, protect against cyberattacks, and predict failures.
Jul 31st, 2020
At PACK EXPO Las Vegas in fall 2019, Syntegon’s Pack 102 horizontal flow wrapper with three Fanuc robots was demonstrated loading meal kits.
Robotics Special Report: Vision for the Future
New vision systems for robotics, including 2D and 3D machine vision, enable broader packaging applications.
Jul 30th, 2020
Bmw Pickbot
Technology Matters: OEE, BMW's AI Robots, Cloud Cost Factors
In this episode we look at OEE and its potential role in industry's digital transformation; why BMW developed its own artificial intelligence powered robots; and seven critical cloud cost factors.
Jul 30th, 2020
The Spider 200i from BluePrint Automation uses a multi-axis robot to pick snack bags on-the-fly and vertically case pack them into a cassette that forms a vertical pack pattern.
Robotics Special Report: Mass Customization Demands Flexibility
A growing omnichannel environment requires that CPGs have the flexibility to produce a range of package sizes and styles. Automation provides that capability.
Jul 29th, 2020
The SmartGuardUV autonomous mobile robot at work in a warehouse facility. Source: Fetch Robotics
More Disinfecting Robots Come to Market
Increasing numbers of autonomous mobile robots are being developed to help facilities address the need for repeated disinfecting in response to COVID-19.
Jul 29th, 2020
The MSP-200 features semi-automated changeover, which allows it to convert to different case configurations in less than 10 minutes.
Robotics Special Report: Case Packer for Croutons Saves Dough on Corrugated
Specialty food products manufacturer installs a robotic case packer for croutons that can keep pace with the rest of the packaging line, while saving costs on shelf-ready packaging, as well.
Jul 28th, 2020
The well-known trunk-and-spur configuration will serve as the general topology for Ethernet-APL. Source: Profibus & Profinet International.
OPC Foundation Joins APL Project; Announces OPC UA Motion
Highlighting its role in the development of new industrial process and discrete communications, the OPC Foundation has joined the advanced physical layer for industrial Ethernet project group and is working with ODVA and Sercos on a new motion technology.
Jul 28th, 2020
The Cobot Expo will take place online July 28-30.
Cobot Deployment Shines in COVID-19 Pandemic
Leading up to its virtual Cobot Expo this week, Universal Robots highlighted several cases where small companies have been using collaborative automation to keep production going amid the crisis.
Jul 27th, 2020
Timothy S. Matheny, P.E., president of ECS Solutions.
The Importance of Material Tracing
Traceability on a processing or production line is incredibly important, especially when it comes food products, where having the ability to track every ingredient down to the source is crucial to the health and safety of the consumers.
Jul 27th, 2020