The supplier’s 100mm AC motor line is said to provide 1/8 hp (93w) in 30 percent less volume than previously available.
These 4-in. diameter single-phase motors have been mated to the vendor’s 750 Series right angle gearing to offer 104 in-lbs (11.8 N-m) of continuous torque with 3-wire reversible hook-up. The 100 mm AC Right Angle gearmotors are powered by these 115-volt, 60Hz single-phase TEFC permanent split capacitor motors. Well-suited for packaging equipment and conveyor systems, they are offered in six standard versions with gear ratios from 5.2:1 to 50:1 and fixed output speeds from 327 to 28 RPM respectively. Continuous output torques range from 12 to 104 in-lbs (1.4 to 11.8 N-m). The motors are available in a ¾-in. (19mm) hollow shaft configuration, or can use quickly replaceable single or double output stub shafts, and can be either foot- or face-mounted. A rear motor shaft extension can be fitted with an optional power-off brake.
Inductive Automation offers multiple editions of Ignition created for specific use cases. See what differentiates Ignition, Ignition Edge, Ignition Cloud Edition, and Ignition...
Castle & Key brought new life to a historic Kentucky distillery by blending 140 years of heritage with cutting-edge automation. With help from Gray AES, they replaced outdated...
Learn how Inductive University can help you overcome today’s biggest roadblocks in SCADA training, such as prohibitive costs, gated software access, and more.
Forget complex programmingget smarter, faster automation with MOVI?C. With scalable performance, multibus flexibility, and safety built in, its control tech that adapts to ...
