EtherNet/IP I/O Blocks

May 4, 2010
A line of EtherNet/IP machine-mount I/O blocks and an IP 67 unmanaged switch have a low initial cost per point, says the vendor. 

Fast and easy IP addressing is accomplished using BOOTP/DHCP, through an IP67 IP Address Plug (IPAP), via a pushbutton display (100 series only), or Web pages. Backlit for easy reading, an addressable display shows all the octets of the IP address, subnet mask and gateway address while push buttons allow for easy adjustment of any octet of the IP address, subnet mask and gateway address. Detachable for rapid module replacement, the IP Address Plug (IPAP) stores the module’s addressing information in a convenient quick-disconnect unit. Certified by ODVA to ensure interoperability, these I/O blocks operate up to 100 Mbit/s speeds. The Ethernet cordset attachment point uses a rugged metal threaded M12 D-coded port.

Balluf
www.balluf.com
800.543.8390

Subscribe to Automation World's RSS Feeds for Products

Sponsored Recommendations

C2-08DR-4VC

CLICK PLUS discrete/analog combo module, Analog Input: 2-channel, current/voltage, Analog Output: 2-channel, current/voltage, Discrete Input: 4-point, sinking/sourcing, Discrete...

MSD-SLC16G

CLICK industrial memory card, 16GB microSD. For use with all products with microSD memory card slot.

C0-12DRE-D

CLICK Ethernet Analog PLC, 24 VDC required, Ethernet and serial ports, Discrete Input: 4-point, DC, Analog Input: 2-channel, current/voltage, Discrete Output: 4-point, relay, ...

C2-FILL

CLICK PLUS option slot cover.