Mencom: M23 Encoder Cables and Connectors

Over-molded connectors for standard and no-shaft encoders are available in 12, 16, 17, and 19 pole with straight or right angle heads.

Nov 26th, 2015
Aw 90039 1511np Mencom


The connectors are all UL listed and designed to endure positive vibration for use with motor drives and moving assemblies. In addition they provide IP67 rating for harsh industrial environments. The cable jackets are available in ITC-ER PVC, shielded PUR and shielded TPE jacket and they are offered in many standard off the shelf lengths. The mating receptacles are available with 1/2-inch NPT, back mount, panel mount, rear mount, M20 or M20-long (for thicker panels) mounting threads. In addition, a wide variety of color codes are available to match the user's application needs. The standard shell material is nickel plated brass, while M20 connectors are also available in stainless steel.

>>For more information on this product, click here
Mencom Corporation
www.mencom.com
770.534.4585

Josh Glass, Lead Automation Engineer/Network Specialist at Panacea Technologies
Network Needs Versus Network Nicety
Find out the requirements a Panacea Technologies’ Networking Expert recommends you consider before determining a switch manufacturer for your next networking project.
Nov 23rd, 2020
This image highlights how Single Pair Ethernet technology fits within industry standards, components, and devices, as well as the varied applications into which it can extend.
Single Pair Ethernet Explained
This article describes Single Pair Ethernet (SPE) and its applications in industry to help users better understand this emerging Ethernet technology.
Nov 5th, 2020
Carlo Gavazzi Dc Switching Solid State Relays
Switching Relays Offer Low Power Dissipation Output
Are designed for applications that require critical response times and rapid cycling
Nov 2nd, 2020
Lnx 1600 1
High-Port Count Industrial Unmanaged Ethernet Switches
Antaira Technologies has announced the expansion of its industrial networking infrastructure family with the introduction of the LNX-1600 series​.
Oct 28th, 2020
Inj C200 G Bt T 1
Antaira Technologies’ IEEE 802.3bt Gigabit Type 4PPoE Injector
Antaira Technologies has announced the expansion of its industrial networking infrastructure family with the introduction of the INJ-C200G-bt-T​.
Oct 20th, 2020
Pr132020 Beckhoff El51xx Web
EtherCAT Terminals
Beckhoff Automation introduces EL51xx EtherCAT terminals with built-in incremental signal analysis functionality.
Oct 14th, 2020
Csm 19 10 17 Smart Ex 02 366c3d6986
Pepperl+Fuchs’ ecom Introduces New Smartphone Smart-Ex 02 for Hazardous Areas
The explosion-proof smartphone for Zone 1/21 and Div. 1 is an AT&T Network Ready Device.
Oct 6th, 2020
Power Quality
Denison Technologies Integrates HMS Networks’ Edge Gateways Into Their Power Quality Monitoring System
Denison Technologies and HMS Networks partner to bring a product that delivers industrial reliability and reduced unplanned downtime through continuous power monitoring.
Sep 25th, 2020
Ec Js 20200706 04 Group Image Serial Gateways Device Master
Pepperl+Fuchs Reveals Newly Integrated DeviceMaster Products
DeviceMaster gateways link the world of serial communication to Internet of Things.
Sep 17th, 2020
Overview Io Link
Starter Kits Provide Inexpensive Entry into Balluff IO-Link
Measurement, sensing, and traceability versions available at promotional pricing.
Sep 17th, 2020
Pina
PI North America Announces Website Expansion to the Spanish Language
PI North America, the non-profit member-supported organization for PROFIBUS and PROFINET technologies in North America, announces an expansion of its website to the Spanish language.
Sep 14th, 2020
Mac Sec Swiches
Wago’s New Managed Switches Provide Leading-Edge Network Security
Managed switches from Wago provide point-to-point network security that protects against numerous threats.
Sep 10th, 2020
Sp Et111 1600x800 0
T1 Industrial Connector for Industrial Single Pair Ethernet
Harting's T1 industrial connector mating face is standardized according to IEC 63171-6 (formerly IEC 61076-3-125) and meets IEEE 802.3 requirements for Single Pair Ethernet, and also works across common industrial protocols.
Sep 8th, 2020
Thomas Rettig states “As the inventor of EtherCAT, Beckhoff is pleased with the overwhelming response despite the fact that the openness of EtherCAT generates more competition. On the other hand, Beckhoff customers benefit from the greatest diversity of devices on the market.”
Beckhoff Technology Sets Vendor ID Record
The EtherCAT Technology Group issued its 3,000th EtherCAT vendor ID in July 2020. Beckhoff introduced the EtherCAT real-time Ethernet system to the market in 2003 and disclosed its details within the ETG the same year.
Sep 1st, 2020
Eigr C3 White Label 5 19
EIGR-C3 Gigabit Cellular Router Now Available
The EIGR-C3 Gigabit Cellular Router from Contemporary Controls is a high-speed router that links cellular to 10/100/1000 Mbps Internet Protocol (IPv4) networks.
Aug 4th, 2020
Pr Io Link Masters No Bkgd
IIoT-Enabled Network Blocks for Digital Industrial Transformation
Carlo Gavazzi's Y Series feature an embedded web interface and OPC UA for full remote access and control of the IO-Link master and connected devices.
Aug 4th, 2020
Io Field2
Wago’s New I/O System Field Provides Dependable, Cabinet-Free Automation
Wago's I/O System Field is equipped with innovative load management. Current and voltage levels can be recorded and evaluated, and overload limits and alarms can be set for each channel providing system reliability.
Jul 30th, 2020
Lnp 1204g 10g Sfp (v2) 1
Antaira’s 12-Port 10G Unmanaged Industrial Ethernet Switches
Antaira Technologies's 10-Gb unmanaged Ethernet switches are industrial-grade and are designed for various markets’ edge-level networking applications in manufacturing automation, power/utility, water wastewater, and oil/gas/mining.
Jul 29th, 2020
Inbacprt1 K20000 Side L Btl
New Intesis Gateway Makes Communication Between Profinet and BACnet Easy
A new IntesisTM protocol translator for communication between PROFINET PLCs on factory floors and Building Management Systems with BACnet IP/MSTP.
Jul 24th, 2020
2001np Matrox
Computer for Machine Vision Applications
The Matrox Supersight Uno offers maximal I/O capabilities plus direct interfacing with GigE Vision and USB3 Vision cameras.
Jul 21st, 2020
More in Networks
Uno 220 Front Right 3m
Advantech Launches UNO-220 Raspberry Pi-Ready Industrial Gateway Kit for IoT Application Development
Advantech, a leading provider of embedded platform system, is pleased to announce its new UNO-220 Raspberry Pi-ready industrial-grade gateway kit.
Jul 2nd, 2020
Pr Icotek Kel Dp
New Cable Entry Plates from Icotek
Icotek is expanding its range of cable entry plates with the articles KEL-DP 25 version A and KEL-DP 32 version A and B.
Jul 2nd, 2020
Inbacprt1 K20000 Side L Btl
New Intesis Gateway Makes Communication Between Profinet and BACnet Easy
HMS Networks announces a new Intesis protocol translator for communication between Profinet PLCs on factory floors and Building Management Systems with BACnet IP/MSTP.
Jun 30th, 2020
Modbus Gateway
Building Automation Systems (BAS) connections with Modbus RTU
The Modbus Gateway MR-GW from Metz Connect is a cost-effective communication option of Modbus TCP clients with one or more Modbus RTU slaves, and features intuitive and software-independent TCP configuration via web interface.
Jun 30th, 2020
Can Ib640 Pcie Montage 2
CAN-FD Multi-channel Ixxat PC-interface for Automotive Test Systems and Industrial Applications
HMS Networks now extends its Ixxat PC-interface portfolio with the multi-channel interface CAN-IB 640/PCIe that offers four channels each for CAN-FD/CAN and LIN connectivity.
Jun 29th, 2020
Anybus Wireless Bolt Press Photo
Cellular Internet Connectivity for Remote Assets With the Robust Anybus Wireless Bolt IoT
HMS Networks announces the release of Anybus Wireless Bolt Internet of Things which enables reliable cellular-based internet connectivity for assets in the field, using the new LTE-based networks NB-IoT and CAT-M1.
Jun 17th, 2020
Southwire Vntc Cable 5x7
AutomationDirect Adds VNTC Tray Cable
VNTC Tray Cable from AutomationDirect is rated for use in Class I, II, and III, Division 2 hazardous location, allowing it for use in temperatures up to 75°C in wet locations and 90°C in dry locations.
Jun 17th, 2020
Industrial Ethernet Cable 5x7
Cat5e Industrial Ethernet Cable from AutomationDirect
Quabbin DataMax Extreme Industrial Ethernet cable jackets were developed to survive the many industrial hazards that commercial jackets will not.
Jun 17th, 2020
KEB’s EtherNet/IP™ S6/F6 products are ODVA certified.
KEB America Introduces EtherNet/IP for S6 and F6 Drives
EtherNetIP is now available for the S6 and F6 variable-frequency drives from KEB America.
Jun 16th, 2020
Anybus Compact Com I Io T
Anybus CompactCom Enables Secure Industrial Internet of Things Communication for Devices
HMS Networks is announcing the availability of Anybus Com-pactCom IIoT Secure products for both EtherNet/IP and Profinet, including a new complete security platform for IIoT communication over OPC UA and MQTT.
May 22nd, 2020
Matrix 702
Artila Reveals New Wide Temperature Wireless Gateway Matrix-702
Artila releases the the Matrix-702, a wireless Internet of Things gateway for wired or wireless data transmission.
May 12th, 2020
Image Mepax Harpoon Pins
Press-Fit Contacts For Elbow and Straight PCB Sockets
Lemo’s new harpoon earthing pins enable pre- installing easily various receptacles/socket.
May 12th, 2020