WAGO's New 750-439 NAMUR Ex i Module

With increased domestic energy production in the U.S. (e.g., oil reserves), many new automation systems need to have the ability to operate in hazardous locations.

This content was submitted directly to this website by the supplier.

Aw 21701 Wago 03 27

Automation systems used in this type of environment must be able to meet not only stringent safety standards but also the requirements of those specific applications, such as hazardous location level monitoring, pressure control, valve positioning or temperature monitoring. WAGO Corporation's Ex i modules have barriers built-in, which saves users not only panel space, but engineering and commissioning hours. The new 750-439 NAMUR Ex i Module offers a flexible and effective solution for intrinsically safe digital applications.

The 750-439 features eight digital input channels with short circuit and wire-break diagnosis in each channel. The digital input module receives binary signals from sensors operating in hazardous environments of ATEX Zones 0/20 or 1/21, connecting to intrinsically safe NAMUR sensors, optocouplers, mechanical contacts and other actuating elements.

The module supplies connected sensors with a short-circuit protected operating voltage of 8.2 V. For each channel, the module detects sensor failures, such as wire-breaks or short circuits. Diagnostic messages and the status of each input channel are indicated via integrated green LEDs. A color change to red signals an open circuit or a short circuit.

Diagnostic messages can also be displayed via higher-level control system and configuration software. When monitoring mechanical contacts instead of NAMUR sensors, the wire-break or short-circuit diagnostic LED can be deactivated via process image.

Within the WAGO-I/O-SYSTEM 750, the 8-channel digital module can be installed in Zone 2 alongside standard automation components, saving time and money. No additional devices (e.g., Zener barriers or isolating amps) are required and high-channel density is provided in a compact capacity, saving valuable space in the control cabinet. Any configuration of the I/O module is possible within an intrinsically safe segment when configuring the fieldbus node.

The 24 mm wide 8-channel module is ATEX and IECEX certified. Ideal for a variety of hazardous industries including oil and gas, mining, shipboard control and distilleries, the 750-439 meets the needs of intrinsically safe digital applications.

>>For more information on this product, click here.

Companies in this article
More in Home